Fordmods Logo

Apline Digital Amp Settings!!?? 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: Apline Digital Amp Settings!!??
Posted: Thu Sep 07, 2006 1:21 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 930

Joined: 6th Nov 2004

Ride: EB SXR6 | ED XR8 Sprint

Location: Sydney
NSW, Australia

After having some problems with the wiring of the sub i played around with the amp settings and now it doesnt sound no where near as good as it used to. one reason is becasue i dont know what half these settings mean- Mainly mode 4!, so i am going to list them here in hope that someone can tell me what to put it on/ or what they mean. it is an alpine mrd m500 mono block amp running one 12" alpine v12 in series.


setting

1- Input Mode [1ch or 2ch]

2.1- Low Pass Filter [on or off]

2.2- Adjusting Low Pass Filter Frequency from [30-200Hz]

3.1 Subsonic Filter [on or off]

3.2 Adjusting the subsonic filter frequency from [15-50Hz]

Mode 4 is what i have really screwed up!

4.1 Parametric Equalizer [on or off]

4.2 Adjusting the parametric equalizer frequency [30- 160 HZ]

4.3 Adjusting the parametric equalizer width range is [0.5/1/2/3/4/5]

4.4 Adjusting the parametric equalizer level goes from [+-12dB]

5.1 Bass compensation [on or off]

6.1 Time correction [on or off]

6.2 Adjusting the time correction delay time [0-10ms]

7.1 Phase [o or 180 degrees]

8.1 Amplifier ID [0 - 9]

8.2 Turn on Delay Setting [0.0 - 2.0s]

9.1 Safe Mode [on or off]


I know this seems like alot but i have tried adjusting a million times and i cant get it right! my main concern is all of mode 4 so even if just with mode 4 i can get some help of what it should be it would be great!!!

Thanks.

 

_________________

EB SXR6. ED XR8 Sprint.

Top
 Profile  
 
 
Posted: Thu Sep 07, 2006 1:24 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 2288

Joined: 4th Dec 2004

Ride: '98 EL Fairmont

Location: Melbourne
VIC, Australia

hey mate, try posting on www.caraudioaustralia.com and you should get a decent response there. That forum has some guys that really know their stuff. This forum has a few guys into car audio but you might have more luck at caraudioaustralia

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Apline Digital Amp Settings!!??
Posted: Thu Sep 07, 2006 2:25 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4946

Joined: 15th Nov 2004

Gallery: 2 images

Ride: Trik'd up EFII XR6

Location: Perth
WA, Australia

BOSXR8 wrote:
After having some problems with the wiring of the sub i played around with the amp settings and now it doesnt sound no where near as good as it used to. one reason is becasue i dont know what half these settings mean- Mainly mode 4!, so i am going to list them here in hope that someone can tell me what to put it on/ or what they mean. it is an alpine mrd m500 mono block amp running one 12" alpine v12 in series.

I know this seems like alot but i have tried adjusting a million times and i cant get it right! my main concern is all of mode 4 so even if just with mode 4 i can get some help of what it should be it would be great!!!

Thanks.


setting

1- Input Mode [1ch or 2ch] - Simply to state whetehr you are using this as a 2 channel amplifier or single channel acting a mon amplifier....for you mode 1-1 i think so it shows 1ch

2.1- Low Pass Filter [on or off] - Since subs are connected you want this set to on - this will cut of the high frequencies trying to be passed to your sub.

2.2- Adjusting Low Pass Filter Frequency from [30-200Hz]
If you look in your manual for the sub it will state for ported or sealed enclosure...what is the best frquency for your subs...i can tell you if u give me the model number of the sub....or tell me what alpiony TYPE it is...and what ohm level the coils are so a type r 12" sub with dual 2 ohm coils will be SWR-1222D/

3.1 Subsonic Filter [on or off] again set to on since a sub is connected.

3.2 Adjusting the subsonic filter frequency from [15-50Hz] - again consult the sub manual for the most appropriate frequency to be set for that sub.

Mode 4 is what i have really screwed up!

4.1 Parametric Equalizer [on or off] - turn this off if you feel you have screwed this up.....for subs i wouldnt bother touching this....unless your really know what your doing when it comes to advanced equaliser tuning leave this off.

4.2 Adjusting the parametric equalizer frequency [30- 160 HZ]
see 4.1
4.3 Adjusting the parametric equalizer width range is [0.5/1/2/3/4/5]
see 4.1
4.4 Adjusting the parametric equalizer level goes from [+-12dB]
see 4.1
5.1 Bass compensation [on or off] - leave this off....bass can be set from the HU

6.1 Time correction [on or off]
Again like 4.1 ... the system will sound fine if u leave this off....its more important for staging your front stage and rear fill but again a setting for advanced users when u know what your doing.

6.2 Adjusting the time correction delay time [0-10ms]
see 6.1
7.1 Phase [o or 180 degrees]
This is just to set if your subs are inverted....ie they fire into the enclosure not out of....0 is firing into the boot - 180 is the sub fires into the sub box/enclsure..
8.1 Amplifier ID [0 - 9]
This is for when using an amplifier link device and capable head unit so you can tune individual amps via the hu with the corresponding amp id number....leave this-unless u plan to use it
8.2 Turn on Delay Setting [0.0 - 2.0s]
leave this as default...0.0s - this is just to set your sub distancing...just leave this
9.1 Safe Mode [on or off]
leave this off....this i think will knock all the gains etc done in case you have set voltages etc too high...and risk damaging the map...this will set the power out put to verly low....

 

_________________

For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested

Top
 Profile  
 
 
Posted: Thu Sep 07, 2006 2:25 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4946

Joined: 15th Nov 2004

Gallery: 2 images

Ride: Trik'd up EFII XR6

Location: Perth
WA, Australia

If youd like any of that explained in more details or still dont understand any of the above give me a yell.

 

_________________

For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested

Top
 Profile  
 
 
Posted: Fri Sep 08, 2006 11:44 am 
Stock as a Rock
Offline
User avatar

Age: 47

Posts: 180

Joined: 21st Jul 2005

Gallery: 4 images

Ride: FG XR6

Location: Geelong
VIC, Australia

2.2 set to about the middle of the range, 90Hz.
this will send only sub bass to the sub.

3.2 set to the lowest, 15Hz.
this will cut out frequencies you can't hear, saving more power for
the ones you can.

All the others like Kev says...

6.1 set to off. No point using time correction on the sub without the other
speakers as well.

 

_________________

Subtle but high quality audio system.
Alpine processor and amp / Focal Utopia splits / Soundstream Exact sub

Top
 Profile  
 
 
Posted: Fri Sep 08, 2006 12:05 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4946

Joined: 15th Nov 2004

Gallery: 2 images

Ride: Trik'd up EFII XR6

Location: Perth
WA, Australia

maximus wrote:
2.2 set to about the middle of the range, 90Hz.
this will send only sub bass to the sub.

3.2 set to the lowest, 15Hz.
this will cut out frequencies you can't hear, saving more power for
the ones you can.

All the others like Kev says...

6.1 set to off. No point using time correction on the sub without the other
speakers as well.


For 2.2 id be going even lower the 90hz...yeh this is safe and should only send sub bass frequencies...also for 3.2...the Type R 12" subs are setup ideally for a tuned frequency of 49hz in a sealed 24L enclosure - Vented 42L @ 30hz and if ported 42L @ 30hz with a 7.6cm diameter port and port length of 34cm

...and agree with maximus for 6.1just set it to off.

 

_________________

For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested

Top
 Profile  
 
 
Posted: Fri Sep 08, 2006 12:21 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 930

Joined: 6th Nov 2004

Ride: EB SXR6 | ED XR8 Sprint

Location: Sydney
NSW, Australia

champions thank you all for your input, ill set mode 4 to off and see how i go. keep ya's posted.

thanks again.

 

_________________

EB SXR6. ED XR8 Sprint.

Top
 Profile  
 
 
Posted: Fri Sep 08, 2006 12:24 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4946

Joined: 15th Nov 2004

Gallery: 2 images

Ride: Trik'd up EFII XR6

Location: Perth
WA, Australia

BOSXR8 wrote:
champions thank you all for your input, ill set mode 4 to off and see how i go. keep ya's posted.

thanks again.


I think and espescially since you admitted to playing with the EQ :P and messin it up that setting it back to off straight away you should notice the diff :P

 

_________________

For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 11:11 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names