|
| dsnow_01 |
|
|||
|
Guys ive searched and searched and cannot find a single mention of the standard EF Front speaker screws.
Please can someone advise/confirm/disagree and or tell me what to do? After taking my door trim off the other day i found that the standard speaker had some weird (male star screw) holding the speaker in?? is this normal? i dont have a bit for it so will plyers be enough to remove it? Any help would be great.. thanks in advance |
|||
| Top | |
|||
| Interceptor |
|
||
|
they're just torx head security screws, just go down to your local bunnings/mitre 10/home hardware and buy a security/tamperproof driver bit set, they're about $10
_________________ Banned |
||
| Top | |
||
| dsnow_01 |
|
|||
|
ah sweet... cause from all the talk about removing front speakers n stuff, and no-one had mentioned anything... thanks interceptor..
also another quick question is there any tricks on getting the door lock pin and door lock pin surround unattached from the trim.. mine wasnt moving at all... |
|||
| Top | |
|||
| mr_sperm1 |
|
|||
|
i didn't have them holding the speakers in, i just had normal phillips head screws for them, and the torx head screws for the head unit
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| Interceptor |
|
||
|
dsnow_01 wrote: also another quick question is there any tricks on getting the door lock pin and door lock pin surround unattached from the trim.. mine wasnt moving at all... get a good pair of pliers on them and pull straight up, the surrond stays in the doortrim
_________________ Banned |
||
| Top | |
||
| dsnow_01 |
|
|||
|
sweet...my car is a virgin absolutly nothing has been dismantled...ill just have to persist with every step i reckon..
thanks again interceptor |
|||
| Top | |
|||
| zxodus |
|
||
|
i just used pliers, worked fine and put normal screws in with the new speaker
|
||
| Top | |
||
| dsnow_01 |
|
|||
|
zxodus wrote: i just used pliers, worked fine and put normal screws in with the new speaker
yeh sweet... the first time i took off my door trim, i ran outta time and i couldnt get that door pin outta the door...so next time ill see if i can grab that bit from bunnings, or just get some pliers..... |
|||
| Top | |
|||
| joolz |
|
|||
|
An extra small socket will work (4mm i think) they are male so a torx bit wont work.
|
|||
| Top | |
|||
| skidder |
|
|||
|
yeah i just used a normal socket on mine....forget what size but it worked fine
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| zxodus |
|
||
|
yeah i couldent get the door lock thing off and i didnt want to break it so i just hinged the trim out so i could get the stock speakers out and put in the new ones.
|
||
| Top | |
||
| dsnow_01 |
|
|||||||
|
got the response front fitted heaps happy now...there by far not the best speakers, but best bang for buck quality vs cost it does awsome.....s**t better than standard fronts.. some pics just for the hell of it
|
|||||||
| Top | |
|||||||
| stomper |
|
|||
|
i put new speakers in and the passenger side was destorting so i am like s**t these are new. Took the trim off just to see that one of the plastic clips that hold the speaker covering on was touching the rubber seal around the speaker. So i trimmed it and put it back on and its all good.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
