|
| twirqurky |
|
||
|
Took out the stock Ford Pioneer 4's from the parcel shelf only to find they are very weird.
How easy is it to convert this werid loom like wiring setup to a normal one to plug in my 6x9's? |
||
| Top | |
||
| baxrr6 |
|
||
|
u can buy a plug that will plug into the loom and convert into 2 wires for your 6x9's from autobarn or places like that.
|
||
| Top | |
||
| joolz |
|
|||
|
Just buy some male spade terminals and some speaker wire then make your own adaptors.
|
|||
| Top | |
|||
| Interceptor |
|
||
|
and since when were they 4's?
_________________ Banned |
||
| Top | |
||
| xr Rob |
|
|||
|
with ya new speekers there should be cable that comes with them cut the end with the clips off and cut the plug off the stock wires twist together solder tape and your all set
_________________ If you think life is bad. Imagine being a egg...you only get laid once, you only get smashed once and the only bird that sits on your face is your mum! |
|||
| Top | |
|||
| russo1 |
|
||
|
how the hell did u fit 6x9 wen u had exisitng 4s i got the same thing wot didu cut the parcel shelf to fit em in or sumfn n wot wit dat plug thing im confused i came across that too wot do i do about that
|
||
| Top | |
||
| fairmont599 |
|
||
|
cut off the plug, the wire with a black stripe is ur negative. get some spade clip plug things, crimp in place plug em in an away you go.
|
||
| Top | |
||
| mr_sperm1 |
|
|||
|
them 4's are 6's!
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| DRHEMI |
|
|||
|
Interceptor wrote: and since when were they 4's?
I was thinking the same thing - I thought holy c r a p I just got new 6.5" now I am going to have to cut a even BIGGER hole 
_________________ PROEF 13.46 @ 105.78mph - 1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan |
|||
| Top | |
|||
| stomper |
|
|||
|
What i always do is cut the ford plug off and solider and heat shrink new plugs on. Works a treat.
I hate doing bad work when it comes to the sound system.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| russo1 |
|
||
|
in my montyy they are definaely stock pioneer 4"s so how the hell do u fit 6x9s in der some one tell me and my wires are pink wit blue stripe in them
|
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
just cut the wires and add spade connectors
_________________ T.I. Performance - Ford Performance Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts and much more! |
|||
| Top | |
|||
| Chich |
|
||
|
EF Fairmonts definitely DO NOT have 4" rear speakers - they are 6". My 6.5" Boston Acoustic rears slipped right in, no massaging required.
_________________ V8 Windsor here we come..... |
||
| Top | |
||
| russo1 |
|
||
|
r u definately sure cause i am goin to buy a pair today so its definately 16cm in diameter
|
||
| Top | |
||
| Slabz |
|
|||
|
xr Rob wrote: with ya new speekers there should be cable that comes with them cut the end with the clips off and cut the plug off the stock wires twist together solder tape and your all set
i dont know what solder tape is exactly but it sounds dodgy as... i say there are three options: 1. terminal strips - quick, easy, reuseable 2. crimp lugs - also fairly quick, easy and reusuable 3. soldering - fidliy, you need a soldering iron, gives the best sound result NEVER use sticky tape to hold two wires together like my mate does 
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
