|
| mootz |
|
||
|
Hey guys,
i have a 1989 Ford falcon EA and i want to put a new head unit in, any tips or tutorials anyone is willing to share? thanks, |
||
| Top | |
||
| Airved |
|
|||
|
Do you own the new headunit? install instructions came with my pioneer one. You need to wire up the headunit's loom and bolt it to some brackets that hold it in place.
_________________ Auto '99 AU Fairmont
|
|||
| Top | |
|||
| mootz |
|
||
|
the head unit i got was a JVC one, it did come with instructions but not in terms of wiring. is there a rough idea one what colours connect to what?
|
||
| Top | |
||
| jonathon |
|
|||
|
you should be able to find required information in this link
http://www.fordmods.com/forums/Factory- ... o-d15.html
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| mootz |
|
||
|
ahh thanks mate! you're a legend
|
||
| Top | |
||
| BaYa |
|
||
|
go to autobarn and get the adapter plugs makes it so much easier it costs like $30 all up and it becomes plug and play, it will need a plug from the factory ford plug to pionner and another plug which is from the back of your h/u to the pionner plug, sounds wired but thats what ive got. check the aerpro website http://www.aerpro.com.au/
|
||
| Top | |
||
| mootz |
|
||
|
hey guys, does anyone know what that special screw driver is to remove the head unit out?
if so where and how much could i get it for? |
||
| Top | |
||
| SpeedyED |
|
|||
|
BaYa wrote: go to autobarn and get the adapter plugs makes it so much easier it costs like $30 all up and it becomes plug and play, it will need a plug from the factory ford plug to pionner and another plug which is from the back of your h/u to the pionner plug, sounds wired but thats what ive got. check the aerpro website http://www.aerpro.com.au/
A JVC headunit that I bought brand new from JB-Hifi about 2 months ago didn't come with the iso plugs at the end of it's wires. I bought that aeropro cable thing, cut it in half and soldered the end that plugs into the factory plug in the car to wires on the stereo. Would strongly recommend you do the above if you don't have the iso plug at the end of the wires on your headunit.
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| Luxo Sprint |
|
|||
|
get the aeropro wiring harness (male fitting at 1 end and just coloured wires coming out of that)
join the colours up speakers gnd const n remote power not sure bout the power antenna stuff u might have to find the wiring diagram for the head unit wack on some heat shrink before u solder the wires solder them up heat shrink over use a lighter repeat that a few times for all the wires do make sure ur doin the right ones or sumthing may go pop there is a colour diagram on the aeropro harness which tells u what is what pretty simple i brought a ea-ed harness for a job im doin tomorrow for 15bucks at autobarn u cant go wrong heres a link on what ya wanna get http://www.dnaaudio.com.au/blowout_page ... h1692.html |
|||
| Top | |
|||
| howsie |
|
|||
|
mootz wrote: hey guys, does anyone know what that special screw driver is to remove the head unit out?
if so where and how much could i get it for? I picked up a set for $10 at go-lo its all you need for that job
_________________ Current cars |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 7 guests |
