|
| [TUFFTR] |
|
|||
|
If you are a cheapass like me when i did my audio setup, used a 4L Tin of the paint on sound deadner for some aspects of my install. this included my bootlid.
All in all i used about 1L on the bootlid which worked out to about $10, only downside is it really smells for a while. Cover that up with a bootlining and you'll be right. i also used the same tin to do all 4 doors and doorskins, Roof, And other bits and pieces. Just another option. -Paul
_________________ Australias Only TR/TS magna 3.5L DOHC 5sp Manual |
|||
| Top | |
|||
| cooki_monsta |
|
|||
|
just buy the whole car kit off ebay, its $300 delivered which is bugger all, and when you do the whole car your music will sound amasing, trust me
_________________ Mods: sprint kit, steeda short shift, svo lip, El handles, El Air intake, au xr wheels, lukey cat back, jbl focal and pioneer sterio <--- Sold |
|||
| Top | |
|||
| huggiebear |
|
|||
|
i have always used expanda foam from bunnings. 13 bucks. all you have to do is allow room for the foam to expane. done it to 5 boot lids and NEVER had any warpage. i think those who have had it have packed the channels right up before it expands. you can also buy the non expanding foam which you pack tight in the channels and it will set as it is.
i need to do mine as all the welds are gone and on a fairlane its alot of flat sheet metal to be flapping around. sounds horrid. so its expanda foam for me then some flashtac from bunnings to seal the deal 
|
|||
| Top | |
|||
| nannas_ed |
|
|||
|
hey thanks for all the replies.
i fixed the rattle by filling all the gaps up with silicone. worked a treat  now i can have the system cranking and it doesnt sound like my speakers are distorting.
so all up i used: bostik clear multi purpose silicone $3.50 caulking gun $1.87 two sheets of dynamat extreme $20
_________________
|
|||
| Top | |
|||
| huggiebear |
|
|||
|
i done mine the other day. expanda foam (13 bucks) and a roll of flashtac (37 bucks - larger width)
now the only rattles are from the bumperbar :S BEFORE: 
AFTER: 
and a pic to show what it looks like on the inside 
|
|||
| Top | |
|||
| Timmy Connors |
|
||
|
f**k thats some crazy rattling comming from ur a** there huggie bear!
I thought mine was bad... my el chrome numberplate surround rattles, it has come lose at the bottom any suggestions???
_________________ Connors |
||
| Top | |
||
| huggiebear |
|
|||
|
haha yeah it was horrendous... but its fixed now... well i guess untill i upgrade my subs in a few months.
with yours put in some thicker guage screws and a small dab of silicone around the screwholes under the number plate |
|||
| Top | |
|||
| Timmy Connors |
|
||
|
Yeah thanks mate
i'll give it a go! 
_________________ Connors |
||
| Top | |
||
| huggiebear |
|
|||
|
oh before you silicone, have some prepsol handy and a small rag covered in it to clean any bits showing... its a sinch to clean it off that way. trust me i worked around that stuff for a while. it sucked lol
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
