Fordmods Logo

Any Help? 

 

Page 1 of 2 [ 25 posts ] Go to page 1, 2  Next

 
 Post subject: Any Help?
Posted: Mon Apr 11, 2005 10:59 pm 
Fordmods Newbie
Offline

Age: 31

Posts: 19

Joined: 9th Nov 2004

Gallery: 3 images

Ride: EF Fairmont

Location: Swan Reach
VIC, Australia

Anyone got any help on how to get these led washer jets going, i just want them hooked up to the headlights for now, but eventually make a switch. I know about the earth, i just need someone to help me find the headlight wire, and be able to tap into it with out cutting...???
please any help would be greatly appreciated .... ie: no flamming or ricing etc.

Thanks in advance
Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 1:13 am 
Fordmods Newbie
Offline

Age: 31

Posts: 19

Joined: 9th Nov 2004

Gallery: 3 images

Ride: EF Fairmont

Location: Swan Reach
VIC, Australia

well, can someone please tell me the best way to feed ires through the engine bay into the interior???
whats the best access point, and what do i need to remove?

thanks
Top
 Profile  
 
 
 Post subject: Re: Any Help?
Posted: Tue Apr 12, 2005 1:19 am 
Technical Contributor
Offline
User avatar

Age: 32

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

Danielhm1 wrote:
no flamming or ricing etc.


Dude, your gunna get it so sit tight and prepare lol...

Honestly, WHY!?!?

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
 Post subject: Re: Any Help?
Posted: Tue Apr 12, 2005 1:25 am 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 5313

Joined: 6th Nov 2004

Gallery: 4 images

Ride: Surf, Turbo Diesel

Location: Melbourne, S.E Suburbs
VIC, Australia

voxace wrote:
Danielhm1 wrote:
no flamming or ricing etc.


Dude, your gunna get it so sit tight and prepare lol...

Honestly, WHY!?!?


well he shouldnt because this isnt in the flaming section

mate i wont be able to help ya, but try and find out yourself
take off ya dash and follow the wires see where they go

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Any Help?
Posted: Tue Apr 12, 2005 1:33 am 
Technical Contributor
Offline
User avatar

Age: 32

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

chunkz wrote:
well he shouldnt because this isnt in the flaming section

mate i wont be able to help ya, but try and find out yourself
take off ya dash and follow the wires see where they go


Of course Chunks can't help ya, he can't even put a wheel on properly!

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 1:49 am 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 5313

Joined: 6th Nov 2004

Gallery: 4 images

Ride: Surf, Turbo Diesel

Location: Melbourne, S.E Suburbs
VIC, Australia

i have... and i did 6 times... (changed some couple weeks ago)
so i do think you are a wanker and im sure you have most likely done worse stuff

but your too much of a little b**ch to confess, because you might cry or some s**t..

 

_________________

Image

Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 1:56 am 
Getting Side Ways
Offline

Age: 36

Posts: 7287

Joined: 5th Nov 2004

Gallery: 12 images

Ride: 1994 ED XR8 Sprint

Location: Somewhere in
QLD, Australia

dude..... seriously, unless you like being harassed by the cops, dont bother wiring them up

 

_________________

Banned

Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 1:59 am 
Technical Contributor
Offline
User avatar

Age: 32

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

Ahahaha settle, don't cry! I'm just kiddin dude sheesh. So sensative lol... :roll:

Daniel son! Please don't put LED washer jets on your car, it actually looks pretty shmick!

As for help, the wires can be ran through the clutch cable hole if need be.

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 2:45 am 
Fordmods Newbie
Offline

Age: 31

Posts: 19

Joined: 9th Nov 2004

Gallery: 3 images

Ride: EF Fairmont

Location: Swan Reach
VIC, Australia

thanks for most of your help. Local cops dont harrass me, cause i play footy with half of them! i have got them going, but want it to be in the dash, so i can switch on and off. Where abouts is the clutch hole???
mine is an auto... any other suggestions???

Please, only help if ya can.
Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 2:55 am 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 5313

Joined: 6th Nov 2004

Gallery: 4 images

Ride: Surf, Turbo Diesel

Location: Melbourne, S.E Suburbs
VIC, Australia

umm
if you take of dash surround... you can see a whole heap of wires going down the steering wheel to like where the pedals are... follow them
(or try hole where brakes are? or acc?)

 

_________________

Image

Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 9:00 am 
Getting Side Ways
Offline

Age: 34

Posts: 1204

Joined: 9th Nov 2004

Gallery: 11 images

Ride: EL Fairmont Ghia V8 Turbo

Power: 303 rwkw

Location: Melbourne
VIC, Australia

What do you mean any other suggestions....it's the only way through the firewall into the interior. Pop your bonnet and stand at the front of the car. The clutch cable hole is on the left hand side of the motor and looks like a thin tube coming from the firewall, just down and right to the brake booster and brake fluid reservior. Run your wire through there and the wire will pop out the other side in the car up under the steering wheel. You shouldn't have to pull anything off like the facia or anything. Might take you a few minutes to find where it has come through but you will find it.

 

_________________

EL Fairmont Ghia V8 Turbo 303rwkw
Image

Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 9:07 am 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 492

Joined: 8th Nov 2004

Gallery: 2 images

Ride: EF Fairmont Wagon, ph34r!

Location: Northam
WA, Australia

After you get the washer jets done you'll have to get matching park lights and underbody neons as well. Also, don't forget the 12" monster tach with shift light (even if it's an auto), race seats that don't match the rest of the interior, 12" milo tin exhaust, 30" wheels with .5" thick tyres, 6ft wing, outrageous body kit and most importantly of all, TEH STICKERS!!11 You can get the honeyz or win the races without TEH STICKERS!!!1

A better idea by far though is to just sell the Falcon, buy a Bitsamissin Prancer then do all of the above to that instead of gheying up the Falc.

 

_________________

Team Argon Silver

Top
 Profile  
 
 
Posted: Tue Apr 12, 2005 10:23 am 
Technical Contributor
Offline

Age: 31

Posts: 6047

Joined: 12th Nov 2004

Ride: Ford Ef Futura

Location: Perth
WA, Australia

Couldnt help yourself could ya Jase?

You forgot how much aerodynamics the stickers add to the car. It reduces the drag created by the car and increases its 1/4 mile times.
Top
 Profile  
 
 
Posted: Wed Apr 13, 2005 3:02 am 
Fordmods Newbie
Offline

Age: 31

Posts: 19

Joined: 9th Nov 2004

Gallery: 3 images

Ride: EF Fairmont

Location: Swan Reach
VIC, Australia

Ok, thanks for the people that helped...
I Found a whole at the back of the engine bay that was plugged up. I rammed a screw driver through it and set the switch up.
I originally got the washer jets cause mine had faded. The chrome looks pretty good, and ik thought, why not. Im glad i have done it, ive even labeled the switch with the on being "rice" and the off being "nice"
My whole front end was (body) was redone and sprayed after crashing through the footy railing at my local footy ground (DONT ASK HOW!) :P
Its looking better then ever, blue dash going in tommorow night,
ill post pics when its done, its definitely a nice car... well i think so anyways,

Peace

P.S
a bit off topic, i need a new headunit (sold my pioneer 7650mp for the excess)
im looking at the 8560mp, does anyone have any pics of it, or can tell me if its face is motorized??? the pioneer site doesnt specify,
Top
 Profile  
 
 
Posted: Wed Apr 13, 2005 3:16 am 
Getting Side Ways
Offline
User avatar

Age: 33

Posts: 927

Joined: 6th Nov 2004

Ride: BA Falcon EGas

Location: Perth
WA, Australia

Danielhm1 wrote:
a bit off topic, i need a new headunit (sold my pioneer 7650mp for the excess)
im looking at the 8560mp, does anyone have any pics of it, or can tell me if its face is motorized??? the pioneer site doesnt specify,


Head unit isn't motorised..only the 8450 (which i have and its really cool!!!)

and the new 9650

here's the sites:
8650: http://www.pioneeraus.com.au/car%5Fentertainment/cdtuners/dehp8650mp/index.html

9650: http://www.pioneeraus.com.au/car%5Fentertainment/cdtuners/dehp9650mp/index.html

 

_________________

BA Falcon Futura on EGas. Stock as...

EF 5 speed manual; PH 4480 Pacemaker Headers; 2 1/2" Lukey Mandrel Bent System; Hi Flow Walker Cat; Stage 3 Crow Cam; ChipTorque Chip; 3" Mandrel Bent Intake; K&N Pod Filter; Low Pedders Suspension; 17" EL GT Champagne Rims; RPM Series Clutch

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 25 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 17, 2017 6:25 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names