Fordmods Logo

Bad Mags??? 

 

Page 1 of 2 [ 30 posts ] Go to page 1, 2  Next

 
 Post subject: Bad Mags???
Posted: Wed Jul 20, 2005 9:39 pm 
Parts Gopher
Offline
User avatar

Age: 39

Posts: 89

Joined: 11th Jul 2005

Ride: AU XR6 II

Location: .
NSW, Australia

Today i took my EL into Ford for its 130K service after paying 370 bucks for the service they told me that my Mags are of bad quality and i should go and buy some good quality ones like ROH or simmons.


the mags i have are Avanti stalkers and i bought them through ssv there only 2 months old, Ford removed a chunk of rubber from the inside of one of the tyres that was causing them to be un balanced.


what do you recon?, sohuld i get rid of them and save up for a set of ROH mags or something similar, and are ROH mags all of the same quality?

 

_________________

AU XR6 II, 5 SPEED MANUAL, RED, 18" Kaotics RIms :)

soon to come: extractors, exhaust, 19"rims and superlows.

Top
 Profile  
 
 
 Post subject: Re: Bad Mags???
Posted: Wed Jul 20, 2005 9:43 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 4305

Joined: 6th Jul 2005

Ride: BA xr8 Magnet ute

Location: Melbourne
VIC, Australia

EL4.0L wrote:
Today i took my EL into Ford for its 130K service after paying 370 bucks for the service they told me that my Mags are of bad quality and i should go and buy some good quality ones like ROH or simmons.


the mags i have are Avanti stalkers and i bought them through ssv there only 2 months old, Ford removed a chunk of rubber from the inside of one of the tyres that was causing them to be un balanced.


what do you recon?, sohuld i get rid of them and save up for a set of ROH mags or something similar, and are ROH mags all of the same quality?



post up some pics of the wheels. but it sounds like either you baught some dodgy a** rim...... or the ford guys are full of crap and want you to spend more money. cheers
Top
 Profile  
 
 
Posted: Wed Jul 20, 2005 9:43 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3928

Joined: 5th Nov 2004

Gallery: 9 images

Ride: ED 5 Speed GLiXR

Location: Now in Brisbane
QLD, Australia

Well ROH make the ford steelies (well on my car they did) so its no wonder ford are recommending them.
i say just keep what youve got.

 

_________________

17" Tezza Steelies, King F**king lows, pedders sports ryders, 2.5" cat back exhaust, pacemaker extractors, T5 manual
Low, loud and Slow

Top
 Profile  
 
 
Posted: Wed Jul 20, 2005 9:45 pm 
Getting Side Ways
Offline
User avatar

Age: 43

Posts: 1052

Joined: 12th Nov 2004

Ride: NC II Fairlane

Location: Newcastle
NSW, Australia

when you pay 4g for mags (roh) you wanna hope they r good quality.

wait to see if it happens again or take it to a wheel,suspention specialist.

being from ssv they would be second hand right?

 

_________________

"Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."

Now with el thermos fitted.

Top
 Profile  
 
 
Posted: Wed Jul 20, 2005 9:45 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2975

Joined: 5th Nov 2004

Ride: BF Typhoon

Location: Melbourne
VIC, Australia

If they are reccomending you spend money ELSE where, Id be inclined to believe it.
If they wanted u to dish out for stock rims or something else from then, then id be warey.

 

_________________

BF Typhoon, Dejavu - 6sp Auto, Leather, Sunroof, 19"s, Electric Pedals, Tint, FPV Sports Wheel, FPV Mats.

Top
 Profile  
 
 
Posted: Wed Jul 20, 2005 9:49 pm 
Getting Side Ways
Offline

Age: 42

Posts: 7287

Joined: 5th Nov 2004

Gallery: 12 images

Ride: 1994 ED XR8 Sprint

Location: Somewhere in
QLD, Australia

nothing wrong with advanti

remember, all wheels sold/fitted to vehicles after early/mid 70's all have to comply with a set of standards

 

_________________

Banned

Top
 Profile  
 
 
 Post subject: Bad Mags???
Posted: Wed Jul 20, 2005 9:52 pm 
Parts Gopher
Offline
User avatar

Age: 39

Posts: 89

Joined: 11th Jul 2005

Ride: AU XR6 II

Location: .
NSW, Australia

Heres a pic of the mags (not a really good pic), when i bought the mags from SSV i thought that they were selling me new mags, and the had that nice new smell about them.

But i also belive that the ford fellow is just trying to flog me a new set of rims, iam taking it down to a suspension specialist tommorow and then ill find out the real story.

thanks for the quick replies people

 

 

Attachments:
P1010027.JPG
P1010027.JPG [ 650.08 KiB | Viewed 170 times ]

 

_________________

AU XR6 II, 5 SPEED MANUAL, RED, 18" Kaotics RIms :)

soon to come: extractors, exhaust, 19"rims and superlows.

Top
 Profile  
 
 
Posted: Wed Jul 20, 2005 10:54 pm 
Smokin em up
Offline
User avatar

Age: 69

Posts: 285

Joined: 14th Nov 2004

Gallery: 10 images

Ride: buick

Location: melbourne
VIC, Australia

A young guy at work had a set of VTSS copies on his VT fitted. There was a constant vibration & after going back to the place he brought them they found that 1 of them could not be balanced properly so he ended up fitting a set of genuine VTSS at a higher cost & it fixed the vibration.

ghiaman
Top
 Profile  
 
 
Posted: Thu Jul 21, 2005 2:58 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 1104

Joined: 10th Nov 2004

Gallery: 10 images

Ride: Isuzu MU-X ,2018 Kia Cerato

Location: Mackay
QLD, Australia

my old set of ROH snypers there was a faulty rim, one rim was always hard to balance out. you could balance it out perfect on the balancing machine but you put it on the front of the car there was always slight vibration, i just always tryed to put that rim on the back of the car.

 

_________________

'96 DF II LTD 6cy
'15 Isuzu MUX LST

Top
 Profile  
 
 
Posted: Thu Jul 21, 2005 5:59 pm 
Smokin em up
Offline
User avatar

Age: 40

Posts: 263

Joined: 7th Nov 2004

Gallery: 1 images

Ride: BA II XR6 Turbo Ute & XH Ute

Power: 295 rwkw

Location: Skye
VIC, Australia

ive got advanti rims and have had no problems with them and ive had them for ages and they get a fair work out. although they are not as good qaulity as ROH id have them over simmons anyday as i have seen the problems with 3 piece rims leaking and cracking

 

_________________

~Such Is Life....
EL Fairmont Ghia: lowered suspension , TIKFD custom plates, 20x8.5 XHP Shoreline, soon to have: JVC head unit, Eclipse speakers, Alpine and Sony Amps, 2x JL Audio 12w3v2 subs

Top
 Profile  
 
 
Posted: Thu Jul 21, 2005 6:10 pm 
Smokin em up
Offline

Age: 39

Posts: 252

Joined: 14th Jun 2005

Gallery: 4 images

Location: Sydney
NSW, Australia

i have heard nothing but good comments about ROH's, i reckon not only do they have some awesome styles, but every1 that i have heard thats had them has had no problems with them, tis why i just bought myself a set of 18"ROH's
Top
 Profile  
 
 
Posted: Thu Jul 21, 2005 6:55 pm 
Parts Gopher
Offline
User avatar

Age: 39

Posts: 89

Joined: 11th Jul 2005

Ride: AU XR6 II

Location: .
NSW, Australia

I just went and spoke to a suspension & wheel expert, and according to him nothing is wrong with the rims, they are operating fine. and that i shouldnt listen to a word FORD said.

 

_________________

AU XR6 II, 5 SPEED MANUAL, RED, 18" Kaotics RIms :)

soon to come: extractors, exhaust, 19"rims and superlows.

Top
 Profile  
 
 
Posted: Thu Jul 21, 2005 7:43 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3343

Joined: 5th Nov 2004

Gallery: 9 images

Location: Brisbane
QLD, Australia

NABAXT wrote:
i have heard nothing but good comments about ROH's, i reckon not only do they have some awesome styles, but every1 that i have heard thats had them has had no problems with them, tis why i just bought myself a set of 18"ROH's

I have a problem with my ROH wheels. They're f**k UUUUUUUUUUUUUgly.. :lol:
Top
 Profile  
 
 
Posted: Thu Jul 21, 2005 8:03 pm 
Getting Side Ways
Offline
User avatar

Age: 60

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia

EL4.0L wrote:
I just went and spoke to a suspension & wheel expert, and according to him nothing is wrong with the rims, they are operating fine. and that i shouldnt listen to a word FORD said.


The guys at Ford probably wanted to buy them off you cheap.

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"

Top
 Profile  
 
 
Posted: Thu Jul 21, 2005 8:08 pm 
Smokin em up
Offline

Age: 39

Posts: 252

Joined: 14th Jun 2005

Gallery: 4 images

Location: Sydney
NSW, Australia

GlennAUII wrote:
NABAXT wrote:
i have heard nothing but good comments about ROH's, i reckon not only do they have some awesome styles, but every1 that i have heard thats had them has had no problems with them, tis why i just bought myself a set of 18"ROH's

I have a problem with my ROH wheels. They're f**k UUUUUUUUUUUUUgly.. :lol:


what? noo, thats bcuz u have an au not a ba, and ba's just make everything look good...
JOKES (i can tell im about to cop soo much s**t off everyone here that owns au's) :lol: :P
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 30 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 19, 2024 2:36 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names