Fordmods Logo

Home » Forums » Fordmods Tech » Exterior Modifications

Bumper sag 

 

Page 1 of 1 [ 11 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
robsa000
 Post subject: Bumper sag
Posted: Tue Jan 24, 2006 3:41 pm 
Fordmods Newbie
Offline

Posts: 3

Joined: 16th Apr 2005

Location: Perth
WA, Australia
Hey, i've noticed that my front bumber (C2R kit) is sagging a bit. There is quite a noticable gap on the right side, and a small one on the left. Any ideas on how to fix this? Or off to the panel beaters? What kind of work/$$ involved with this?

 

 

Attachments:
IMG_0759.JPG
IMG_0759.JPG [ 36.02 KiB | Viewed 140 times ]
IMG_0760.JPG
IMG_0760.JPG [ 35.44 KiB | Viewed 178 times ]
Top
 Profile  
 
 
Happy
Posted: Tue Jan 24, 2006 3:52 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 10128

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia
isn't there just a screw underneath which holds it up - have you had a look?

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."
Top
 Profile  
 
 
robsa000
Posted: Tue Jan 24, 2006 4:06 pm 
Fordmods Newbie
Offline

Posts: 3

Joined: 16th Apr 2005

Location: Perth
WA, Australia
yer i've had a look, but I can't see any obvious screws
Top
 Profile  
 
 
Happy
Posted: Tue Jan 24, 2006 4:11 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 10128

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia
just walk into a supercheap and pick up a gregorys manual off the shelf, have a look how the bumper is held on then put it back!!! :D

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."
Top
 Profile  
 
 
robsa000
Posted: Tue Jan 24, 2006 4:14 pm 
Fordmods Newbie
Offline

Posts: 3

Joined: 16th Apr 2005

Location: Perth
WA, Australia
yer I was thinking that, but it's not the standard bumper. you think they still attach it the same?
Top
 Profile  
 
 
Leroy
Posted: Tue Jan 24, 2006 4:35 pm 
Getting Side Ways
Offline

Age: 42

Posts: 3794

Joined: 9th Aug 2005

Ride: Hilux

Location: Mornington
VIC, Australia
yeah they should all attach the same, a bracket rivited in there.

 

_________________

Now driving a Hilux
Top
 Profile  
 
 
Black Betty
Posted: Tue Jan 24, 2006 6:12 pm 
Stock as a Rock
Offline

Age: 42

Posts: 116

Joined: 5th Jan 2005

Ride: EF XR8

Location: Leeton
NSW, Australia
There is a bracket on the corner which is held in with 3 pop rivets, check to see if the holes for the pop rivets are not slotted, if they are good your bracket is probably bent or the guard could be bent, just release the plastic liner then undo the 13mm nut holding the bumper on to the guard and have a look.
Top
 Profile  
 
 
twirqurky
Posted: Tue Jan 24, 2006 6:45 pm 
Technical Contributor
Offline

Age: 37

Posts: 6047

Joined: 12th Nov 2004

Ride: Ford Ef Futura

Location: Perth
WA, Australia
Hammer it back up into place
Top
 Profile  
 
 
EALCON 3.9
Posted: Wed Jan 25, 2006 12:37 pm 
Tyre Shredder
Offline

Age: 37

Posts: 351

Joined: 5th Oct 2005

Ride: Falcon

Location: Rockingham
WA, Australia
Happy wrote:
just walk into a supercheap and pick up a gregorys manual off the shelf, have a look how the bumper is held on then put it back!!! :D


i tried that once but all the manuals are vacuum wrapped in plastic so u cant open them.
Top
 Profile  
 
 
Bob Hall
Posted: Wed Jan 25, 2006 4:36 pm 
Commercial Sponsor
Offline

Age: 71

Posts: 463

Joined: 4th Dec 2004

Ride: AU ute

Location: Canberra
ACT, Australia
The AuUbar normally fits up there with a stud and nut arrangement. I'd imagine the C2R bar fits the same way. If so, I'd be surprised if the nut's come loose, but it's possible. If so, re-align the bar and tighten the nut well.
Cheers, Bob

 

_________________

Commercial Sponsor
Canberra Car Styling
[url=canberracarstyling.com.au]Image[/url]
Top
 Profile  
 
 
madmax
Posted: Wed Jan 25, 2006 8:24 pm 
Getting Side Ways
Offline
User avatar

Age: 60

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia
EALCON 3.9 wrote:
Happy wrote:
just walk into a supercheap and pick up a gregorys manual off the shelf, have a look how the bumper is held on then put it back!!! :D


i tried that once but all the manuals are vacuum wrapped in plastic so u cant open them.


Yes they have wised up to us library users.

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 11 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » Exterior Modifications

Who is online

Users browsing this forum: Google Adsense [Bot] and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Apr 25, 2024 6:34 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names