hi matt, my goodies arrived today,but just got home so i wont look yet,driven to learn

Lovely, have fun with them mate

Hi matt, what sort of products do you offer? price range and so forth, would you have a website?
Im interested in bringing out the shine in my car

Im using Meguiars Wax at the moment (around $30 a bottle) comes with the pad, and I use a micro fibre to get it off

-Wash the car
-Chamois it with Enka fill (best Chamois i've used)
-Apply the meguiars wax with the pad (using swirl motions)
-Leave it for 10mintues
-Buffer it off with a microfibre cloth

would this be the right way to go?
thanks
-ASh

Nice to meet you hybrid

Dream Machines and now Glowriders(spelt ridaz for the younger generation) conglomerate between myself and two other businesses offer the worlds finest car refinishing products

These are much more than common car care products

They can bury and thus reduce orange peel in paint finishes by machine, convert exterior trims to a paint like finish, for complete DIY detailing and protection

We offer these categories

Clay bars
Alcohol and Engine coolant free Quick detail sprays to add months and months more protection and boost protective coatings plus clean and protect interior surfaces.
Pre polishing preparation products to prepare the surface for polishing
Abrasive polishes for permanent removal of swirl marks, scratches, spider webs and to give a mirror finish as wet as a swimming pool
Exterior trim polish

Non Abrasive long term filling polishes, glazes and sealants to fill in paint defects and damage without removing any paintwork/clearcoat

Interior care products such as Driven Multi surface eco cleaner, Driven VRL, Auto Pro soft n supple leather cleaner, liquid leather conditioner/protectant

For a matte or satin finish that is totally dry with no residue to wipe off

Paint, Glass and Mag Wheel protection products made from liquified glass, silicate ion and ultra polymers

Toughseal, Glare, Driven
Petroleum free tyre gel
Wheel arch blackening spray
Liquid plastic vinyl trim repolymeriser
And much more
Masking tapes
Lake Country Machine and hand polishing pads
Ultra microfibre towels - the best range available

pricing - clay bars $35 to 40 (three types)
Detail sprays - Aussie Gold $18 per 750ml
Driven Quick spray - $35 per 473ml (super concentrated - to be diluted with water)

I don't have a website up yet but you can get more info about this from this site (the soon to be home of Glowridaz)

http://www.driandshine.com.au/training.html
http://www.driandshine.com.au/

send me an email at dreammc@tpg.com.au or ring 0439 840 637 or 08 8280 9210 for any assistance or to place an order

Regards

Matt
Dream Machines Australia

NEW CLAY BARS

Interested in using better and easier clay bars for decontamination of your car's surfaces

Check these out

Looking at low to mid thirties for these new UK made clay bars that only need water with no soap or surfactants that make clays fall to bits

http://www.bilthamber.com/autoclay.html

DAVE'S ADELAIDE TRIP

Would like to share some of the pics from dave's visit to the Dream Factory

Here is our beloved dave claying my fathers MG F race car


This time we see him machine applying glare zero to my right rear door


Results he achieved with some hi temp, menzerna IP, 106FF and 85RD

This can be enhanced further from there but time ran out for us this time

Matt I've just done my ELGT copy rims in ClearKote Vanilla Moose Wax and then sealed it with the Jeff's Werkstatt Acrylic Jett is that alright to use on rims?

Or should I have done it the opposite way round?

GREAT POST! will help alot

Hi Timmeh

I can't believe that you still have the clearkote VM, how old is that bottle
Anyway, that is the correct way and acrylic jett is a superb rim protectant

Take care

Honestly, if we had the time to use Glare Zero, Hi Temp, Menzerna then Glare Micro Finish and Glare Advanced paint sealant, that red MG boot would look better again

Yeah I take the time to shake the bottle thoroughly every couple of weeks cause the components separate. Is there something out now that out does the Clearkote VM? I take it it is not produced anymore?

Yeah I take the time to shake the bottle thoroughly every couple of weeks cause the components separate. Is there something out now that out does the Clearkote VM? I take it it is not produced anymore?

Thats good of you

Yes there are quite a few that outdo the clearkote VM (yes it is still being made but not enviro safe due to it's 100% dependance on petroleum ingredients

Prima Amigo worlds best glaze - this blows clearkote away with it's far superior ultra slickness, ability to darken the shade of dark paints, is a polymer glaze and thus any sealant or wax in the world can be applied to it, it is silicone free and has long term filling power, like glare

It's also around the same price.

Glare Pro Polish and Glare Advanced - give a glass like wet finish

Ewww petroleum based.

I might have to get some of this Prima Amigo worlds best glaze.
I'll send you a PM in regards to an order.

Cheers

Also AMIGO does not separate and has a mud cake like natural scent

I want to spoon it out the container but can't

Here are a couple extra pics from my trip to Matts when we decided to try the trim dream on my Mitsubishi 380 hire car.
The results turned out great!

 

 

Attachments:

File comment: after trimdream RIMG0266.JPG [ 85.44 KiB | Viewed 1616 times ]

File comment: After trim dream RIMG0265.JPG [ 81.99 KiB | Viewed 1609 times ]

File comment: Before trim dream RIMG0269.JPG [ 85.09 KiB | Viewed 1603 times ]

File comment: beforeTrim dream RIMG0268.JPG [ 82.63 KiB | Viewed 1613 times ]

File comment: A few products I bought RIMG0260.JPG [ 81.06 KiB | Viewed 1605 times ]

Nice shots dave, not showing trim dreams complete performance but gives people an idea