|
| shot |
|
|||
|
hey guys,
just wonderin is the "xt" badges on the ba just stickon or do they have a d**k thing through the panel? second question who does the removal? panel beaters? i'm assuming the FALCON badge is a stick on too. thanks guys i think it should make the tailgate of my wagon look a bit better! |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
they all stick on wiht double sided tape
you can remove them yourself it pretty easy just get em warm with a hair dryer or hot ait gun ( not to hot or the paint can bubble ) then carfully use a flat bladed knife to prythe badge off OR some fishing wire will do the trick 
remove the excess glue/tape with kero and then give the area a polish will look smick!
_________________ RIP SCOTT |
|||
| Top | |
|||
| GlennBA |
|
|||
|
tip hot water on it then use fishing line or a credit card to pry it off. Then just use metho to clean the glue up. Thats how i did mine.
|
|||
| Top | |
|||
| Disco Frank |
|
|||
|
GlennXR6T wrote: tip hot water on it then use fishing line or a credit card to pry it off. Then just use metho to clean the glue up. Thats how i did mine.
ahh nice idea ! got the credit card make sure u use your folks
_________________ RIP SCOTT |
|||
| Top | |
|||
| offyaguts |
|
||
|
Go hair dryer and windex. Heat it up for a fair bit and it should just peel off. Definetly don't use anything sharp near the paint cause its not hard to get impatient, then use the windex and a cloth and more heat to get the sticky s**t left over from the badge....then finish with a polish!!!
_________________ EL Fairmont Ghia V8 Turbo 303rwkw
|
||
| Top | |
||
| shot |
|
|||
|
thanks heaps fella's
|
|||
| Top | |
|||
| frd80Y |
|
|||
Age: 39 Posts: 212 Joined: 16th Jun 2005 Ride: xd v8 vortech!!! Location: Blacktown,Sydney NSW 2148 |
Disco Frank wrote: they all stick on wiht double sided tape if u want to save the paint ull use the hair dryer!! you can remove them yourself it pretty easy just get em warm with a hair dryer or hot ait gun ( not to hot or the paint can bubble ) then carfully use a flat bladed knife to prythe badge off OR some fishing wire will do the trick remove the excess glue/tape with kero and then give the area a polish will look smick! 
_________________ tubed and blown XD ute here u come!! yahoooo!! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
