Fordmods Logo

manual conversion kit for ef series 2 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: manual conversion kit for ef series 2
Posted: Fri Feb 10, 2012 4:29 am 
Fordmods Newbie
Offline

Age: 30

Posts: 5

Joined: 15th Nov 2011

Gallery: 5 images

Ride: 1994 Ford EF Falcon

Location: Sydeny
NSW, Australia

hey guys, just wondering how much can i find a manual conversion kits for ?, ive heard 350-400 but i saw on ebay for 700 but that was with a manual tailshaft and ecu, ive heard the tailshafts are all the same size whether is an auto or manual sedan, and on a forum i was going to follow didnt say anything about a new ecu, just changed some wires up, but any help would be appreciated and im located in st marys,NSW so if anyone knows any shops that sell the kits that are local to me will be appreciated aswell :)
Top
 Profile  
 
 
 Post subject: Re: manual conversion kit for ef series 2
Posted: Fri Feb 10, 2012 5:33 am 
Tyre Shredder
Offline
User avatar

Age: 44

Posts: 355

Joined: 26th Dec 2008

Ride: BA XLS Ute

Location: Bendigo
VIC, Australia

Top
 Profile  
 
 
 Post subject: Re: manual conversion kit for ef series 2
Posted: Fri Feb 10, 2012 7:18 am 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

loudef4ltr wrote:
hey guys, just wondering how much can i find a manual conversion kits for ?, ive heard 350-400 but i saw on ebay for 700 but that was with a manual tailshaft and ecu, ive heard the tailshafts are all the same size whether is an auto or manual sedan, and on a forum i was going to follow didnt say anything about a new ecu, just changed some wires up, but any help would be appreciated and im located in st marys,NSW so if anyone knows any shops that sell the kits that are local to me will be appreciated aswell :)


If you haven't already had a look The Manual Conversion Guide Thread and the .PDF file within is very helpful.

I converted my EB last weekend and I can confirm that you can use an auto driveshaft with a manual 'box. Just make sure you keep the sedan shaft with the sedan and the wagon and 'lane shafts with those. If you can find the correct manual ECU for your car, that makes it easier and is a better result. The resistor trick can result in bad idle quality and rev hang. Do a search for ECU Catch codes and you will find a list of the ecu's from the EEC 4 and 5 family of falcons ie. XF through AU.

The 'shops' would be eBay and various wrecking yards.

Good Luck!

Evan.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Top
 Profile  
 
 
 Post subject: Re: manual conversion kit for ef series 2
Posted: Fri Feb 10, 2012 9:30 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

...why is this in the exterior modifications?

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: manual conversion kit for ef series 2
Posted: Fri Feb 10, 2012 11:07 am 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

anywhere from 500-1200 depending if you get it from the wreckers or if someone is parting out their car on ebay or fordmods, if your willing to drive to newcastle there may be a guy on fordmods who has a conversion for you? i have sent him a pm enquiring about it for you

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 7:02 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names