|
| taurean01 |
|
||
|
hey all.. just wondering if tail lights from an eb will go into an ea? i know the reverse lights are on the boot garnish on an eb but is it a simple process to switch just the tail lights?
thanks
_________________ ThE ThInG FrOm DoWn UnDeR |
||
| Top | |
||
| Disco Frank |
|
|||
|
pretty sure they should fit!
and a small wiring change is all that is needed to fix the reverse light issue!
_________________ RIP SCOTT |
|||
| Top | |
|||
| taurean01 |
|
||
|
ok cheers for that... ill get right into it after work
_________________ ThE ThInG FrOm DoWn UnDeR |
||
| Top | |
||
| bogan393 |
|
|||
|
its not a easy fit but its possible, i did it to my ea. You have to make 2 big holes in teh boot for the reverse lights on the garnish and make a small bracket to hold the tail lights in as they have different mounting positiong. you also have to cut of the old plug for the ea lights and join the wires to the plug for the eb lights and run a wire up the boot for the reverse lights.
_________________ Rides:
|
|||
| Top | |
|||
| mreb |
|
|||
|
or you change the whole boot lid and replace the bootlock catch thats what i did on my old ea .i got lucky with mine picked up bootlid fairmont garnish both taillights for $150
|
|||
| Top | |
|||
| bogan393 |
|
|||
|
yep thats by far the best way to do it. I got eb tail lights and boot garnish for $45 delivered, but they sat in teh shed for 6 months while i figured out how the f**k to fit them.
_________________ Rides:
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
HI
i did it a couple of months ago. you do have to cut and drill a few things. but it looks much better.. |
||
| Top | |
||
| taurean01 |
|
||
|
ok after a hard couple hours work i got them on but shhh i got no reverse lights haha... at the mement im trying to find a way to put my own reverse light on the ea boot garnish so i dont have to swap my whole boot lid. if i get it done ill post a couple pics up
_________________ ThE ThInG FrOm DoWn UnDeR |
||
| Top | |
||
| bogan393 |
|
|||
|
if your keepig the ea bootlid then its pretty simple to get the eb reverse lights working. simply find the wire on the ea harness that is for the reverse lights and extend it up the boot to the eb reverse lights. run the 2 lights in series and earth it to the boot lid. Works a treat and only requires you to run 1 wire.
_________________ Rides:
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
