|
| the_scotsman |
|
|||
|
bondy99 wrote: 5 days ago I had unintentionally let my passenger side door mirror scrape along a support column in the car port. Now the bugger is virates and not steady when driving. I dont know why that would cause the mirror itself to become unstable, does anyone have an idea what would have give way to allow the mirror to become unstable and is it repairable? Thanks, Peter have a look at my photo...there's not much to it. Either one of the 4 clips has cracked or the spring is bent/snapped. Just pull it off and have a look. |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
the_scotsman wrote: bondy99 wrote: 5 days ago I had unintentionally let my passenger side door mirror scrape along a support column in the car port. Now the bugger is virates and not steady when driving. I dont know why that would cause the mirror itself to become unstable, does anyone have an idea what would have give way to allow the mirror to become unstable and is it repairable? Thanks, Peter have a look at my photo...there's not much to it. Either one of the 4 clips has cracked or the spring is bent/snapped. Just pull it off and have a look. the_scotsman, Thanks , I had seen your photo, you're right there is not much to it, I hope I dont break the glass. Peter |
||
| Top | |
||
| the_scotsman |
|
|||
|
I found it best to move the mirror (the glass part) fully inwards, so there was a gap on the outside between the glass and housing. Then get a screwdriver in there and carefully prise the mirror away from the clips. I was surprised how easily it came off.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 30 guests |
