|
| Falcon96XR6 |
|
|||
|
Hi there, just wondering, if i pull the red xr6 door moulds off my el and repaint them, what should i use to stick them back on? And what would be the best way to remove the leftover double sided tape or whatever they use off the paint after pulling them off, any ideas is appreciated, cheers
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| Gab1 |
|
|||
|
Use double sided tape to stick them back on, and you can use thinners to remove the adhesive, but you want to wash it off pretty quickly with eithier water or prepsol, Prepsol MIGHT work for getting the adhesive off too, but thinners will work better it's just harder on paint. Also a hair dryer will help too.
Gab |
|||
| Top | |
|||
| Falcon96XR6 |
|
|||
|
Quote: Use double sided tape to stick them back on, and you can use thinners to remove the adhesive, but you want to wash it off pretty quickly with eithier water or prepsol, Prepsol MIGHT work for getting the adhesive off too, but thinners will work better it's just harder on paint. Also a hair dryer will help too.Gab Ahh okay, thanks heaps Gab
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| snap0964 |
|
|||
|
If they're stuck to the car okay now - leave them on and do them in situ.
You won't find any double sided tape as good as factory - that includes 3M as well.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Esteven8 |
|
|||
|
snap0964 wrote: If they're stuck to the car okay now - leave them on and do them in situ. You won't find any double sided tape as good as factory - that includes 3M as well. I can confirm this. I ended up having to resort to using Sikaflex to glue the Fairmont moulds on my old EF wagon because the all of the aftermarket tapes were s**t... But once you do that you will have a bad time trying to get them off again.
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
