Hi guys, front passenger window in my AU3 activates downward from its switch but not upward. Drivers door master switch does activate passenger window up and down.. Figuring passenger door switch needs cleaning, My question is can the switch be accessed by removing it from armrest somehow or does door card need to be removed to get at this switch to clean?? Cheers guys..

just put a rag around a flat screw driver (so you dont scratch the plastic) and stick it down the edge of the window switch surround(the plastic bit around the switch) and it should just pop out, no screws or bolts... and to clean it theres just a few clips and it should fall to pieces... good luck putting it back together

Cheers Cam

Hey thanks for that will give it a go, Cheers Burn

FinaLLy got around to doing this job, was so easy i did them aLL:)