|
| ef_paddy |
|
||
|
Hey guys just wondering if anyone know if the seats are a straight swap in to an ef mont? ie will the ba xr seat rails go in to the ef or will i need to use the ef rails? will the efrails line up to the ba seats?
Any help would be greatly appreciated. Cheers, Pat
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| ef_paddy |
|
||
|
No one had a go at this yet?
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| BF XR |
|
||
|
this has been covered many many times
a quick answer is no |
||
| Top | |
||
| fourL6 |
|
|||
|
i haven't heard of it being done without a grinder and welder...
_________________ Was - 2001 AUIII Ford Falcon Forte |
|||
| Top | |
|||
| ef_paddy |
|
||
|
Cheers guys.
Did a search but as you know the search button isn't well
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| frankieh |
|
|||
|
You can do it with AU seats (I know because I have) but I didn't think it was as easy for BA seats or I'd have already done it.
|
|||
| Top | |
|||
| jaysway |
|
|||
|
frankieh wrote: You can do it with AU seats (I know because I have) but I didn't think it was as easy for BA seats or I'd have already done it. have you got AU seats in your EA mate? or have you only done the conversion into EF/EL? cheers |
|||
| Top | |
|||
| ef_paddy |
|
||
|
I've seen au seats in an ef so i know that can be done... Not to keen on being a "pioneer" with ba seats given the cost of the xr's.
Still think they would look awesome retrimmed in the ef interior Cheers guys
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| krisisdog |
|
|||
|
2 ways, either add the EF rails n s**t to the BA seat, or add the BA rails n base to the EF body, I'd go with the former.
|
|||
| Top | |
|||
| frankieh |
|
|||
|
jaysway wrote: frankieh wrote: You can do it with AU seats (I know because I have) but I didn't think it was as easy for BA seats or I'd have already done it. have you got AU seats in your EA mate? or have you only done the conversion into EF/EL? cheers Did it in my EL, not the EA.. so same as EF essentially.. here is a photo. 
|
|||
| Top | |
|||
| ef_paddy |
|
||
|
Wow Frankieh that looks awesome which rails did you use and was there much modding to make them fit?
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| frankieh |
|
|||
|
EL rails bolted straight on.. nice and easy.
in the back you will need to change the seat lock pin for a loop and the bollards are slightly different, but its not that hard. |
|||
| Top | |
|||
| duvauchellemotors |
|
|||
|
I have seen BA XR Seats on an EB here is a pic
Attachment: XR SEats EB.jpg [ 35.49 KiB | Viewed 221 times ] He just swaped the seat on to the Eb Rails Looks Good if you ask me The back seat even fitted in And got a warrent |
|||
| Top | |
|||
| frankieh |
|
|||
|
When he says "rails" he doesn't just mean the runners at the bottom. You basically remove the seat back, and then the seat bottom and put them aside.. then do the same with the old seats and throw all the mech including the seat back include adjuster and everything aside.. then bolt the back and base onto the E series mech.. It's fiddley, but not very hard.
AU and BA are similar from a lot of perspectives.. so perhaps seating is one of them. If that is the case, then one day in the future about a year from now when my supercharged ghia is hooning around.. I'll get a set of EL electric bases and bolt some BF seats onto them... just for that extra coolness. |
|||
| Top | |
|||
| ef_paddy |
|
||
|
Hey guys thanks for the replies it has helped me alot. I have sourced a set of ba xr seats front and back and will pick them up sometime this week or next. I'm not sure if i should put the rears in though, I have an ef mont ghia and the leather rear seats have barely been sat in and are really comfortable besides which the more i replace the more i have to re-trim we'll see though. i'll get pics up as soon as i'm done.
Pat
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
