Does anybody out there know how 2 change the fan speed control module on an EA/NA without pulling the entire dash apart? Any leads to threads or direct info appreciated so I don't end up totally bald.
JR

Pull the glovebox out
Remove the trim that surrounds the glovebox.

It should be accessible from there.

Have removed glovebox etc. and undone the screws. The unit cannot be removed due to the proximity of the ac duct and the large lumps of ally on the controll unit that make it impossible to remove. Akso need to know what needs removing for access to the plug behind the radio. Can't seem to get to it. Must be going about it the wrong way (Doh).

Thanks Sturmovik
Did the old "Pull the glovebox out
Remove the trim that surrounds the glovebox. " trick, and it did the job a treat. Seems there was an awful lot of crap (bugs ,leaves, feathers etc.)in there that was stoppng it from coming out easily.
Cheers
JR