I was just looking through the tech documents section and apparently on ea-ed fairmonts etc you can enter a special monitor mode in the climate control which can display info such as coolant temp, inside and outside temp etc.
The thing is, I cant get this to work. I've tried to follow the instructions exactly but nothing happens. Has anyone else been successful to do this in an EA EB ED? As I think it would be a cool thing to have access to.
This is the info below from the tech documents section:
To enter Monitor Mode (EA/EB/ED Fairlane/LTD models)
Turn the Ignition switch to the "On" Position
Press the Recirculate, Face/Floor, and AUTO Buttons together
Release the Recirculate, Face/Floor, Buttons together and the AUTO Button Last.
This will now bring you in to the Climate control monitor mode.
Pressing the Fan Up and Down Buttons will toggle the reading that is currently being viewed
The Reading Number that is currently being displayed is shown by the Fan Speed on the LCD Panel.
The Test Readouts available are,
L - (1 Bar) - Operator Set Temperature in degrees Celsius (Â°C)
2 - (2 Bars) - Cabin Temperature in degrees Celsius (Â°C)
3 - (3 Bars) - Ambient Temperature in degrees Celsius (Â°C)
4 - (4 Bars) - Evaporator Temperature in degrees Celsius (Â°C)
5 - (5 Bars) - Engine Coolant Temperature in degrees Celsius (Â°C)
6 - (6 Bars) - Sun load Sensor Reading
7 - (7 Bars) - Fan Speed percent (%)
8 - (8 Bars) - Temperature Blend Door Flap percentage (%) opening
9 - (9 Bars) - Aircon and Vent Selection (00 A/C Off Floor) (11 A/C On Face) (22 A/C Off Face/Floor) (33 A/C On Screen/Floor) (4 Screen)
H - (10 Bars) - Water Heater Valve operation (1=On, 0=Off)
Sold my EB
Joined: 19th May 2007
Ride: fairmont ED
interesting, ill give it a try tomorrow and let u know if it works for me
|Who is online|
Users browsing this forum: No registered users and 8 guests