|
| jaysway |
|
|||
|
my cruise works fine in my eb but the lamp on the dash doesn't work when cruise is on.
i pulled the cluster out to replace what i thought would be a globe but there is no globe there to replace, is it sealed inside the cluster? how do i go about replacing it? any help is appreciated cheers |
|||
| Top | |
|||
| lukey1990 |
|
||
|
I didn't really study my cluster last time I had it open. Although I would assume it's a small globe soldered / plugged directly into the PCB inside the cluster.
It's quite easy to completely disassemble the cluster, if you don't feel confident in doing it I can grab mine out tomorrow and check for you.
_________________
|
||
| Top | |
||
| metasaiah |
|
|||
|
All of the globes in my EF dash are in little square socket things (coloured blue, black or white) - you turn them 90 degrees and they come out, and the bulb is in the socket and just pulls straight out.
_________________ EF2 Fairmont Ghia. AU2 engine running EF gear. Intake, exhaust, injection etc; 8" rear stockies with 265/50R15 rubber. Shiftkitted auto, J3, custom grille and dash cluster and lots of other useless crap... |
|||
| Top | |
|||
| jaysway |
|
|||
|
metasaiah wrote: All of the globes in my EF dash are in little square socket things (coloured blue, black or white) - you turn them 90 degrees and they come out, and the bulb is in the socket and just pulls straight out.
i thought it would be the same but EB is different cheers |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
