|
| veeate |
|
|||
|
I've got an EB fairmont and i want to replace the s**t faded black automatic shifter with a more stylish one out of an EL / EF.....Does anyone know if it will fit...if not what mods will i need to do....thanks.....
p.s. im new to this so any help would be great.....also if im goin the wrong way about this please tell me so i dont look like a d***head.....cheers |
|||
| Top | |
|||
| twirqurky |
|
||
|
Obviously you need to modify it a little. Put a thread onto the EB stalk and it shall be sweet Im guessing.
|
||
| Top | |
||
| veeate |
|
|||
|
i havnt had the t-bar off, but im pretty sure theres alrady a thread on the stalk....but like i said...not 100% sure
|
|||
| Top | |
|||
| madmax |
|
|||
|
Yes it should fit. I changed a EA for an EL tbar some time back, the thread is the same, the only mod I had to make was to change the pushrod inside, as I think the EA one was too long. Rather than butcher the EA pushrod I made my own.
_________________
|
|||
| Top | |
|||
| falconea |
|
||
|
Dead right Madmax only the rod is to short. I did the same and made a longer one, it only needs to be about 6-8 mm longer from memory. Works like a charm just screw it on till it works as you would like and lock it off.
_________________ Drive safe, arrive alive
|
||
| Top | |
||
| veeate |
|
|||
|
hang on..im confused........
 is the rod on the EB too long or short.....duz it need to be shortened or extended???? and can i just chop it with a hacksaw if its too long??
|
|||
| Top | |
|||
| JOSE |
|
|||
|
EF/EL shifter stalk is about 15mm shorter, (pushrod is EXACTLY the same length) so to fit to an EA-ED you need to shorten the stalk by 15mm, and thread the stalk 15mm further down OR extend the rod by 15mm BUT you will find the EF/EL shifter handle is sitting VERY high.
I got an EF shifter AND stalk/gate assembly for $25 no need to stuff around cutting+ threading or lengthening, i just have to be bothered getting under the car to install it all.
_________________ Because i can. |
|||
| Top | |
|||
| madmax |
|
|||
|
falconea wrote: Dead right Madmax only the rod is to short. I did the same and made a longer one, it only needs to be about 6-8 mm longer from memory. Works like a charm just screw it on till it works as you would like and lock it off.
Thanks, I wasn't sure which way, as It was quite a few years ago.
_________________
|
|||
| Top | |
|||
| veeate |
|
|||
|
Cheers fellas....problem solved...New shifter handles in and works fine..looks better too..
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
