Fordmods Logo

EL Pedal box HELP! 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: EL Pedal box HELP!
Posted: Sun Mar 25, 2012 8:13 pm 
Fordmods Newbie
Offline

Age: 25

Posts: 14

Joined: 20th May 2010

Ride: Ford EL Falcon

Location: adelaide
SA, Australia

hey guys, converting my NL Fairlane Ghia Concorde to manual, im missing a pin on the clutch pedal that the clutch cable end attaches too, can anyone help tell me what its called or where i can get one from ? trying ford tomorrow, any other help would be great!

thanks


(note pin is where arrow is pointing)

 

 

Attachments:
File comment: el clutch pedal pin
Picture358.jpg
Picture358.jpg [ 215.07 KiB | Viewed 67 times ]
Top
 Profile  
 
 
 Post subject: Re: EL Pedal box HELP!
Posted: Sun Mar 25, 2012 8:28 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11739

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

Grab a Mal Wood pedal pin.

http://www.malwoodauto.com.au/innovations.htm

If you're in a hurry, unfortunately you won't get it sooner unless you can find someone who wants to get rid of their Mal Wood pin.

The conversion didn't come with the manual pedal box? Considering you have ripped out the pedal box...I would have thought you'd replace it with the manual box. Mal Wood pin can be fitted without removal of pedal box.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: EL Pedal box HELP!
Posted: Sun Mar 25, 2012 8:42 pm 
Fordmods Newbie
Offline

Age: 25

Posts: 14

Joined: 20th May 2010

Ride: Ford EL Falcon

Location: adelaide
SA, Australia

yea the conversion did come with the manual pedal box, the pedal box is in the car now but i only just noticed the pin was missing once i tried to fit the clutch cable to the pedal. do you think ford would sell the pin im pointing to in the picture?
Top
 Profile  
 
 
 Post subject: Re: EL Pedal box HELP!
Posted: Sun Mar 25, 2012 9:02 pm 
Technical Contributor
Offline
User avatar

Age: 28

Posts: 3705

Joined: 27th Sep 2006

Gallery: 20 images

Ride: ED Falcon

Power: 133 rwkw

Location: Leeton
NSW, Australia

Phong is talking about the pin the clutch pedal hinges off...

Are you sure this is right? I thought that pin was welded part of the pedal... I doubt Ford will have one too...

Cheers,
Tim

 

 

Attachments:
DSC_0245.JPG
DSC_0245.JPG [ 449.31 KiB | Viewed 58 times ]

 

_________________

93 Red ED 5spd Manual Build Thread

Performance: Complete AUII VCT Wiring & Power Train, Pacey Headers, 2.5" Exhaust, Exedy Clutch, DBA Rotors
Visuals: FG XR Wheel, XR Front, 17's, BA 5 Spd Shifter, BA Ghia Window Switches, NL Cluster
Tunes: 8" Pioneer Sub, JBL Speakers, Clarion Double DIN Headunit

Top
 Profile  
 
 
 Post subject: Re: EL Pedal box HELP!
Posted: Sun Mar 25, 2012 9:16 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11739

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

adamBRUV wrote:
yea the conversion did come with the manual pedal box, the pedal box is in the car now but i only just noticed the pin was missing once i tried to fit the clutch cable to the pedal. do you think ford would sell the pin im pointing to in the picture?


Ohhhh my bad :oops:

I don't think Ford would have it. As Timmy said...it should be welded on :?

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: EL Pedal box HELP!
Posted: Sun Mar 25, 2012 9:49 pm 
Fordmods Newbie
Offline

Age: 25

Posts: 14

Joined: 20th May 2010

Ride: Ford EL Falcon

Location: adelaide
SA, Australia

hmmm wierd!! its just a clean hole, doesn't feel like something has been welded there before ... ill take the clutch pedal off tomorrow and take it the the steel yard, see if i can get a piece same size welded in and just drill a hole in the end. my best bet.
Top
 Profile  
 
 
 Post subject: Re: EL Pedal box HELP!
Posted: Sun Mar 25, 2012 9:53 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11739

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

adamBRUV wrote:
hmmm wierd!! its just a clean hole, doesn't feel like something has been welded there before ... ill take the clutch pedal off tomorrow and take it the the steel yard, see if i can get a piece same size welded in and just drill a hole in the end. my best bet.


You need the proper size diameter so that the bushes sit properly. I'm sure someone on here might know the diameter of the rod/pin...if all fails, take the clevis and bushes with you.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: EL Pedal box HELP!
Posted: Sun Mar 25, 2012 10:05 pm 
Fordmods Newbie
Offline

Age: 25

Posts: 14

Joined: 20th May 2010

Ride: Ford EL Falcon

Location: adelaide
SA, Australia

phongus wrote:
adamBRUV wrote:
hmmm wierd!! its just a clean hole, doesn't feel like something has been welded there before ... ill take the clutch pedal off tomorrow and take it the the steel yard, see if i can get a piece same size welded in and just drill a hole in the end. my best bet.


.if all fails, take the clevis and bushes with you.



was already going to :D
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 15, 2017 12:09 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names