|
| Tomek |
|
||
|
uglybob wrote: haha not for work - accountants don't use too many hand tools
 its jumper leads, socket set, screwdriver set, and other assorted hand tools etc. so nothing too major, but will need a few inches of height to clear them all - perhaps hinge them off the raise at the rear of the boot? 1 question do u have subs in the boot??? See what i might think of doing is not putting in a false floor is to put in a false wall...... If you dont have enough room for the tools etc... is to make up the flase floor.... Then what you can do is also take the thing i said in the last post and then just place it next to it... See the bottom thing i think it comes down to is on how crafty you want to get... |
||
| Top | |
||
| uglybob |
|
|||
|
i'm about to be fitting a sub in the boot, hence my need to get some ideas happening!
keep them coming - there's some good ideas here! 
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| Tomek |
|
||
|
uglybob wrote: i'm about to be fitting a sub in the boot, hence my need to get some ideas happening!
keep them coming - there's some good ideas here! what kinda arrangements do you have for the subs... like where bouts u gonna place them and the amp etc etc.. |
||
| Top | |
||
| uglybob |
|
|||
|
its a single 12" sub, & 2 channel MTX amp. i'm open to ideas about where to place both, however i was going to just place the amp on the raised section behind the seats, and the sub at the back of the boot - i guess how most people do! i have a box for the sub already, so was looking to hide everything else, but still keep the boot practical & have enough space to use it daily
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
Pending how THICK the amp is, you might be able to fit it on the support in the boot uinder the c-pillar and the boot arm will nicely clear past it, and keeps it well out of the way, I have mine mounted there, and a small sub box in the back right of my boot (not the filler side) so I have full boot access at all times.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
i've put the jumper leads in the actual spare tyre in the mont...you should see wat else u can fit in there...
_________________
|
|||
| Top | |
|||
| uglybob |
|
|||
|
mitch_anderson wrote: i've put the jumper leads in the actual spare tyre in the mont...you should see wat else u can fit in there...
i can't fit all my tools in the spare wheel well i can tell you that much mitch! dellboy - the amp is a pretty compact one, so i'm assuming it'll fit there?  lol i'm not too sure where you're referring too exactly though i'm afraid!
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
If you look when you close the boot and watch how the boot arm swings down, there is a fair amount of space bewteen it and the part I am talking about, have a look, it should make sense.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| joolz |
|
|||
|
hey uglybob have a look in my gallery to give u some ideas on ways to mount ur amp(s) so ur boot is still usable yet mounting the amps correctly to dispurse heat.
|
|||
| Top | |
|||
| chunkz |
|
|||
|
yeh i have seen yours before joolz, i think thats a f**k awesome idea...
_________________
|
|||
| Top | |
|||
| Interceptor |
|
||
|
i think sqrl's thread on his AU gives a pretty good idea on what to do for a false floor
http://www.fordmods.com/forums/viewtopic.php?t=7375
_________________ Banned |
||
| Top | |
||
| Tomek |
|
||
|
Interceptor wrote: i think sqrl's thread on his AU gives a pretty good idea on what to do for a false floor
http://www.fordmods.com/forums/viewtopic.php?t=7375 Dont really like the whole idea of the whole floor lifting up.... But thats pretty good! |
||
| Top | |
||
| nicco |
|
|||
|
another place to put the amp is under the drivers seat, that is where mine is, and i dont have any heat issues. although i will still be hooking a fan back up in the next few weeks anyway.
|
|||
| Top | |
|||
| bono |
|
|||
|
Do something like azza did in his EF. have a look in his gallery just modify it like put it on hinges or something so u can lift it up and get access to underneath it
_________________ 6 IN A ROW, THE WAY TO GO
|
|||
| Top | |
|||
| kermey |
|
|||
|
make a mdf tool box to the side of the boot?
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
