Fordmods Logo

fill in the blanks 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: fill in the blanks
Posted: Tue Sep 14, 2010 12:15 am 
Parts Gopher
Offline
User avatar

Age: 28

Posts: 80

Joined: 21st Jan 2009

Gallery: 2 images

Ride: 1995 Ford XG Ute

Location: melbourne
VIC, Australia

Image

pin - colour
1 - orange/yellow -
2 - green/white -
3 - not used
4 - not used
5 - black/brown dash -
6 - not used
7 - not used
8 - pink -
9 - black/brown dash -
10 - brown/black -
11 - green/orange -
12 - white -
13 - not used
14 - white/red -
15 - grey/black -
16 - purple/blue -

really need help with my cruise the ef/el guide isnt much use as the ea-ed speed controllers have 16 pin plugs and the ef/el are 10 where do each of these splice into the gli loom to make the cruise control work
i have the break switch
the two pin plug from the break switch
the 3 pin plug is under the bonnet near the washer bottle for the controller
i have the wheel and boss with the cruise buttons
the vacuume lines
the throttle cables
the vacuume controller near the break booster
the speed controller


the pin numbers dont match with the ef/el cruise guide in the tech doco and there arnt any wire colours written in the ef/el guide
any help would be great

cheers
Attachment:
File comment: speed control unit + loom
speed1.jpg
speed1.jpg [ 174.06 KiB | Viewed 65 times ]

 

_________________

95' XG
93' EB
custom buggy with 900cc yamaha engine

Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Tue Sep 14, 2010 1:06 pm 
Getting Side Ways
Offline

Posts: 5582

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

You need a workshop manual with the relevant wiring diagrams for the ute, and the EA-ED. Then you can work out the wire colours and where they go.

Alternatively, you can put EF-EL cruise in the ute, but only if you are converting to a BBM manifold.

Cheers
BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Tue Sep 14, 2010 2:14 pm 
Parts Gopher
Offline
User avatar

Age: 28

Posts: 80

Joined: 21st Jan 2009

Gallery: 2 images

Ride: 1995 Ford XG Ute

Location: melbourne
VIC, Australia

ahh so no one on here has wired one in from scratch?
what a pain...
would the normal off the shelf gregories/haynes workshop books have it in them?
cheers

 

_________________

95' XG
93' EB
custom buggy with 900cc yamaha engine

Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Tue Sep 14, 2010 2:24 pm 
Getting Side Ways
Offline

Posts: 5582

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

Yes, they should.

Cheers
BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Tue Sep 14, 2010 7:43 pm 
Getting Side Ways
Offline

Age: 40

Posts: 524

Joined: 15th Aug 2010

Ride: Territory SX TX

Location: Townsville
QLD, Australia

There is a tech doument in here I think that has a EF EL manual with the wiring diagram for the Cruise control circuit with wire colours. fordmods-technical-documents-diy-f38/ea-eb-ed-ef-el-nf-nl-ltd-workshop-manual-t86156.html Click the link, has the manual, download as a PDF, I think you have to unzip it.
Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Tue Sep 14, 2010 7:58 pm 
Getting Side Ways
Offline

Posts: 5582

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

Unfortunately, he needs the EA-ED/XG version.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Tue Sep 14, 2010 8:02 pm 
Getting Side Ways
Offline

Age: 40

Posts: 524

Joined: 15th Aug 2010

Ride: Territory SX TX

Location: Townsville
QLD, Australia

EA ED Book is on the same page.
Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Tue Sep 14, 2010 8:30 pm 
Parts Gopher
Offline
User avatar

Age: 28

Posts: 80

Joined: 21st Jan 2009

Gallery: 2 images

Ride: 1995 Ford XG Ute

Location: melbourne
VIC, Australia

downloading the pdf's now

 

_________________

95' XG
93' EB
custom buggy with 900cc yamaha engine

Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Sun Sep 19, 2010 11:46 pm 
Parts Gopher
Offline
User avatar

Age: 28

Posts: 80

Joined: 21st Jan 2009

Gallery: 2 images

Ride: 1995 Ford XG Ute

Location: melbourne
VIC, Australia

hi benj the eb im wrecking the cruise controller was mounter about the right foot under the dash and had factory loom from what everyone says and what iv found is they are factory mounted under the centre console is it a factory mounting? also got a 88 lane and its not under the center console or above the right foot its above the hand break
anyways thanks for the pdf link spliced into the low series loom make all the right noises but either the vacuume controler is fried or theres a vacuume leak somewhere cause it wount hold the speed
cheers

 

_________________

95' XG
93' EB
custom buggy with 900cc yamaha engine

Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Mon Sep 20, 2010 1:07 pm 
Getting Side Ways
Offline

Posts: 2448

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Mate - Factory Pre EB II was under the dash, mounted to the drivers side vent cover plate.

EB II onwards they were mounted under the Console where the Amp goes on Pre EB II

nigel
Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Mon Sep 20, 2010 8:19 pm 
Parts Gopher
Offline
User avatar

Age: 28

Posts: 80

Joined: 21st Jan 2009

Gallery: 2 images

Ride: 1995 Ford XG Ute

Location: melbourne
VIC, Australia

ahh thanks mate i never looked above the right hand vent for the cruise plug just looked under the console guess i might have spliced into a loom that already has a plug on it somewhere ahwell live and learn i spose

cheers

 

_________________

95' XG
93' EB
custom buggy with 900cc yamaha engine

Top
 Profile  
 
 
 Post subject: Re: fill in the blanks
Posted: Sat Oct 02, 2010 10:03 pm 
Parts Gopher
Offline
User avatar

Age: 28

Posts: 80

Joined: 21st Jan 2009

Gallery: 2 images

Ride: 1995 Ford XG Ute

Location: melbourne
VIC, Australia

cruise is in and working
any idea if the ea/ed indicator stalk will fit onto an xg ute for the boss with the cruise contact?

or has the xh ute got the standard ford boss on it?

cheers

 

_________________

95' XG
93' EB
custom buggy with 900cc yamaha engine

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 12, 2017 12:12 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names