Hi guys,

First post here and I really like the site (normally haunt ff.com or ff.com.au. I have a couple of questions regarding the fitment of climate control to an EAII S.

Firstly, Does anybody have the piccies that went with the Modification document 'Adding Climate Control'? I plan to source these parts from a wrecker and pictures of what parts I require sure would help.

Would it be easier/better sourcing a complete Fairmont Ghia loom from the wrecker and using this as the basis of my wiring and would a Fairmont ghia loom plug straight in?

Has anyone else done this modification to their EA/EB and could offer any advice or tips?

Just wanted to get the ball rolling before I commit to the job and will probably have more questions as I progress.

Thanks guys!

Iv heard its a really hard thing to do and not really worth it. A mate had a old ea ghia reck I tried getting the parts for it but gave up cause it looked like it was just going to be impossible. I think iv heard of some people doing it but not many with much success.

Go here and have a look.

http://www.fordmods.com/phpBB2/viewtopic.php?t=4038

I did just that only a few weeks back and it worked a treat. It is not that hard but does take a bit of time.

If you need any help let me know!