Fordmods Logo

Heater probs...... 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Heater probs......
Posted: Tue May 30, 2006 11:05 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1052

Joined: 12th Nov 2004

Ride: NC II Fairlane

Location: Newcastle
NSW, Australia

gday all

Had the heater tap replaced today in my NC and was really looking forward to a warm car to drive in....i turn it on and all that comes out is cool air..........i turned it up to 32d and still cool air. I went back and asked them to have a look at it to make sure all the hoses were put on correct etc....and all was fine.but they did mention that it could be that a vacuum hose on the back of the CC unit was crimpted or loose and to go home to have a look.

cut a long story short,when i pulled the CC unit out ,there were no vacuum hoses in sight or anywhere to put them into,only elec wires were to be seen.

can anyone help me as its getting a bit chilly of late and would like to drive in comfort without the family jewels dropping off.

cheers

 

_________________

"Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."

Now with el thermos fitted.

Top
 Profile  
 
 
Posted: Tue May 30, 2006 11:12 pm 
Getting Side Ways
Offline
User avatar

Age: 27

Posts: 2983

Joined: 15th Apr 2006

Gallery: 5 images

Ride: Falcon

Location: Aberfoyle Park
SA, Australia

are you sure teh lanes had vacc hoses that actually connected to the CC unit its self?

 

_________________

HOLDENS go like rockets. They fall apart in stages!!!

Top
 Profile  
 
 
Posted: Tue May 30, 2006 11:15 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1052

Joined: 12th Nov 2004

Ride: NC II Fairlane

Location: Newcastle
NSW, Australia

stomper wrote:
are you sure the lines had vacc hoses that actually connected to the CC unit its self?


according to old mate at the garage,he said there should be vac hoses at the back of the CCU,but there was nothing there to resemble hoses or where the hoses go,so im stumped

 

_________________

"Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."

Now with el thermos fitted.

Top
 Profile  
 
 
Posted: Tue May 30, 2006 11:59 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1052

Joined: 12th Nov 2004

Ride: NC II Fairlane

Location: Newcastle
NSW, Australia

just did diag test and its the f**k blend door thats stuffed........s**t me to bits having to pull the whole dash out,anyone got any tips.........

 

_________________

"Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."

Now with el thermos fitted.

Top
 Profile  
 
 
Posted: Wed May 31, 2006 4:56 pm 
Fordmods Newbie
Offline

Posts: 17

Joined: 20th Jul 2005

Location: Melbourne
VIC, Australia

My blend door motor was faulty couple a years ago ,there was a post on this web site describing how to repaire it. All my door needed was a clean out in the motor but you have to pull the dash out.
Top
 Profile  
 
 
Posted: Wed May 31, 2006 5:37 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1052

Joined: 12th Nov 2004

Ride: NC II Fairlane

Location: Newcastle
NSW, Australia

how the F... do you take the little globe out of the glovebox?its holted my progress for about 30mins know and need to get going so i can finish by the mornin.

cheers

 

_________________

"Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."

Now with el thermos fitted.

Top
 Profile  
 
 
Posted: Wed May 31, 2006 8:31 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1052

Joined: 12th Nov 2004

Ride: NC II Fairlane

Location: Newcastle
NSW, Australia

few simple questions.
how can i detatch the hood cable from the instrument panel as i cant see any screws holding it in place(looks as if its been plastic welded).

can someone post what the steering column connectors look like as well.

which is the heater control cable,or does my NC have it?

cheers.

 

_________________

"Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."

Now with el thermos fitted.

Top
 Profile  
 
 
Posted: Wed May 31, 2006 11:21 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1052

Joined: 12th Nov 2004

Ride: NC II Fairlane

Location: Newcastle
NSW, Australia

while ive got the dash out is there anything else i could do while its out

 

_________________

"Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."

Now with el thermos fitted.

Top
 Profile  
 
 
Posted: Thu Jun 01, 2006 12:26 am 
Getting Side Ways
Offline

Age: 30

Posts: 4609

Joined: 29th Jul 2005

Gallery: 10 images

Ride: BOXCAR

Location: Launceston
TAS, Australia

NC 5ltr wrote:
few simple questions.
how can i detatch the hood cable from the instrument panel as i cant see any screws holding it in place(looks as if its been plastic welded).

can someone post what the steering column connectors look like as well.

which is the heater control cable,or does my NC have it?

cheers.


bonnet cable just unclips.

Your NC dosent have a heater control cable. It electric / vacume operated.

 

_________________

^^^ What He Said

<a href="http://www.fordmods.com/forums/viewtopic.php?t=44952" target="_blank" class="postlink"> TAS Cruises</a>

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 12, 2017 7:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names