|
| EL Nathan EL |
|
|||
|
Ive taken the door handle out of the door but I want to know how I remove the actual handle from the thing that holds it in?? ..dunno what its called :S
Thanks - Nathan |
|||
| Top | |
|||
| OZBMX |
|
|||
|
Inside or outside?
Inside you just sort of wigglie it round and slide it off, outside, theres a little clip you flip open with a screwdriver.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| EL Nathan EL |
|
|||
|
Inside..But it has the spring in it and what not? I dont wanna break that..
|
|||
| Top | |
|||
| shai12 |
|
|||
|
You need to get this tool, or make one up, quite easy
http://www.vektools.com.au/tools-door-h ... -4859.html |
|||
| Top | |
|||
| EL Nathan EL |
|
|||
|
Ok, thanks Shai
|
|||
| Top | |
|||
| Ballast |
|
||||||
|
EL Nathan EL wrote: Ive taken the door handle out of the door but I want to know how I remove the actual handle from the thing that holds it in?? ..dunno what its called :S
Thanks - Nathan Look at the handle from the top. At the point where it pivots, you should see a metal pin. Remove that pin, and then removing the handle from the surround is easy. All you need is a centre punch (or similar) to remove the pin, not specialised tools. I have a straight screwddriver, which i bought in a s**t set of screwdrivers from bunnings. Failing that, you could use any striaght solid implement such as tent pegs etc. From there, the handle will come off, but it will get stuck on the white clip at the back. To get this off, you need to squeeze the 4 prongs together, and then that clip will seperate. I have found that the easiest way to do this is with a 5mm socket, as you can compress all 4 prongs at once as in the pics below. Cheers Chris
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
||||||
| Top | |
||||||
| Ballast |
|
|||
|
I'll add to my previous post. Before you remove the handle, take note of how the spring sits. It will be a tad tricky putting it back together the first time.
Cheers Chris
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| shai12 |
|
|||
|
Duh I read it wrong
|
|||
| Top | |
|||
| hans hartman |
|
||
|
a_total_tool wrote: I'll add to my previous post. Before you remove the handle, take note of how the spring sits. It will be a tad tricky putting it back together the first time. pin punch or drill bit to push the rolled pin out,to change to chrome handles,as chris said,be carefull and take your time.
Cheers Chris
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| EL Nathan EL |
|
|||
|
Wow thanks for the pics Total Tool, and to everyone else for there help
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
