Fordmods Logo

My Power Window Mistake , Help Needed 

 

Page 2 of 2 [ 22 posts ] Go to page Previous  1, 2

 
Posted: Thu Dec 14, 2006 9:41 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

if you adjust them right, they'll go up and down as per normal. mine have been replaced cause i did the front power window conversion too. they're quick too.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Mon Oct 22, 2007 1:40 am 
Oompa Loompa
Offline
User avatar

Age: 46

Posts: 28

Joined: 14th Apr 2007

Gallery: 12 images

Ride: NA,AU XR6,ZH,P6 LTD,EXPLORER

Location: Adelaide
SA, Australia

i use graphite powder every time.i used to use grease or spray lube but the liquid lubes end up like glue after a while and cause more problem than you started with.graphite powder is available at most locksmiths as they use it for locks too.dont use wd40 on your locks or you end up with grease stains on your clothes from your keys

 

_________________

MAYBE YOU WOULD RATHER PUSH YOUR HOLDEN THAN DRIVE MY FORD AND YOU WILL PROBLY NEED TO.
H.O.L.D.E.N
HOPE
OUR
LUCK
DOESN'T
END
NOW

Top
 Profile  
 
 
Posted: Mon Oct 22, 2007 9:30 am 
Technical Contributor
Offline

Age: 56

Posts: 3227

Joined: 12th Feb 2007

Gallery: 10 images

Ride: Falcon

Power: 113 rwkw

Location: your mums
NSW, Australia

BOSXR8 wrote:
i found that if i tightened the bolts all the way it struggled to go up, although when i lossened them a little it went up fine.


Sounds like you need to put 2 washers on the other side between the reg and the inside of the door, sounds like when you said when you tighten them up it stuffs up sounds like its pulling the windows on an angle.

 

_________________

BANNED

Top
 Profile  
 
 
Posted: Tue Oct 23, 2007 10:01 pm 
Getting Side Ways
Offline

Age: 37

Posts: 996

Joined: 9th Aug 2005

Ride: BA XR6T ute

Location: frankston
VIC, Australia

just lubing it up wont do it you gotta fix it mechanically....

open up the door and with the widow up loosen the bolts as stated earlier replace with a smaller guage bolt (thinner) add big washers and move the reg till in correct position and tighten remember to use lock nuts or you'll be repeating this process in a few weeks
Top
 Profile  
 
 
Posted: Wed Oct 24, 2007 11:27 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 2983

Joined: 15th Apr 2006

Gallery: 5 images

Ride: Falcon

Location: Aberfoyle Park
SA, Australia

noobie..stop diggin up old posts

 

_________________

HOLDENS go like rockets. They fall apart in stages!!!

Top
 Profile  
 
 
Posted: Wed Oct 24, 2007 11:27 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 2983

Joined: 15th Apr 2006

Gallery: 5 images

Ride: Falcon

Location: Aberfoyle Park
SA, Australia

noobie..stop diggin up old posts

 

_________________

HOLDENS go like rockets. They fall apart in stages!!!

Top
 Profile  
 
 
Posted: Wed Oct 24, 2007 11:44 pm 
Technical Contributor
Offline

Age: 56

Posts: 3227

Joined: 12th Feb 2007

Gallery: 10 images

Ride: Falcon

Power: 113 rwkw

Location: your mums
NSW, Australia

s**t i just noticed the date lol, i will take better notice from now on.

 

_________________

BANNED

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 22 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: Google Adsense [Bot] and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 9:04 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names