Hi

I have done a search

In the process of putting in power windows in the ute. Cept i cant remove the door trims.

Removed the handle shroud, pull handle and winders. The problem is the smartlock door locks the square type that sit flush.

As far as I can tell the center that you push to lock is encased by the trim. So do you just pull up on this outer trim till it all pops off a shaft as one or is there something we are missing.

any help is appreciated.

Cheers
Ben

apparantly put a cloth around the door lock and then grip it with a pair of plyers or something then pull it off

Yeh just with it unlocked pull it up, it will just pop off

Don't forget to remove the phillips head screw, and pull back the power mirror fascia on the drivers door.