|
| fat ef falcon |
|
|||
|
what paint is everyone using to spray their dash's. i want to spray mine but dont know what piant to use or how to get a decent result as this is the first time i have done this. any help would be awesome.
cheers
_________________ Thank god for the XR6 Turbo!!!!! |
|||
| Top | |
|||
| fat ef falcon |
|
|||
|
come on heaps of ppl are doin it wat paint is everyone using?
_________________ Thank god for the XR6 Turbo!!!!! |
|||
| Top | |
|||
| x3ros |
|
|||
|
vinyl spray...about $12 a can
_________________ 2003 BA Ford Falcon XR6 | BF Typhoon Intake + K&N Filter | Lukey 2.5" catback zorst | More mods coming soon.... |
|||
| Top | |
|||
| GT-P |
|
||
|
vht color dye- vinyl
|
||
| Top | |
||
| the_scotsman |
|
|||
|
I used cheap spray paint from Supercheap...haven't had any problems with it...
|
|||
| Top | |
|||
| EFFalcon |
|
|||
|
what part of your dash?
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| fat ef falcon |
|
|||
|
the parts around the buttons air vents, around the guages. pretty much what everone else is doing
_________________ Thank god for the XR6 Turbo!!!!! |
|||
| Top | |
|||
| fat ef falcon |
|
|||
|
is there any certain way of doing it? can i do it without tacking the dash off? and will i need a clear coat
_________________ Thank god for the XR6 Turbo!!!!! |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
i'd pull it off, its not that hard.
i used $3 paint from bunnings, matt black. came up fantastic. I simply cleaned everything properly, gave it 2 coats and let it dry. reinstalled and its been fine, no clear coat.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| OBS35N |
|
|||
|
yeah just normal p[aint and then some clear
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| Holbrookau |
|
|||
|
For hard plastics like surrounds: Clean the parts very well with warm soapy water, rinse and dry, then apply a couple of thin coats of plastic primer. The finishing paint is up to you but the Holts Dupli-Color range of spray cans (which includes Plastic Trim Primer) can be found at most auto stores and will do the job well. If you wish you can overcoat with clear.
My opinion only, but gloss finishes on parts that shouldn't be shiny looks tacky. So if you can, go for a satin finish.
_________________ '94 EF GLI
|
|||
| Top | |
|||
| MARK.TANIA |
|
||
|
Ii use 2pac .primer .and paint and clear
|
||
| Top | |
||
| phongus |
|
|||
|
i thought u could use any paint? well i know vinyl spray can on vinyl but plastic anything im guessing....im going the black look and probably black/redish (to go with the car). if only my car was white or black id go for the black/white look.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| twirqurky |
|
||
|
I used the VHT stuff available from Atobarn.
|
||
| Top | |
||
| data_mine |
|
|||
|
profesionally mixed 2-pack in body colour. Same as I use in my engine bay. Beautiful stuff.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
