Quick question about wiring gauges...

Friends getting electronic Volts, Oil Temp, Water Temp and a Tacho gauges for his EL 6 and wants to know where to hook up all the wires. Gay I know, but he's dead set on them.

Anyone can tell where he wires them to? Or pictures of where to connect them? Earth is obviously a screw on the body. But where to connect the +ve and signal wires?

ohh the poor car.

molestered wiring and rice!

Yeh very unfortunate.. worse coz its a stock auto. But please keep the flaming down until I can give him the answers he needs... so I can get a photo and you guys flame to your hearts content.

i feel it's a fordmods responsibility not to give the answers, hence saving the car from that shame

tacho wire to positive on coil
volts to positive on alternator
oil to original oil sender passenger side of engine block i think, might need to install new sender (that should be supplied with guage)
water temp to sensor on front of block

each will most probably have 2 earths
each gauge will also have one wire for light, so tap into the headlight wire behind the switch (take ur cluster out) to find the wire colour look at wiring guide for the el on the forum
then each will just need power from 12v accessories ie cigarette lighter

Sounds like more trouble than its worth. Inc post count sorry.