|
| Walker |
|
|||
|
I just rang my mate for an OMVL R90e and off the top of his head he said no more than $250 brand new.
I asked him again for a price on the large Vialle to suit the Falcon, he said they're over $1000, although there are smaller models that are cheaper but would be too small for the I6. |
|||
| Top | |
|||
| MacGyver |
|
|||
|
Go OMVL. You can tune it yourself and they hardly ever go out of tune, except for the first 1000k's while the diaphram stretches.
cheers Scott
_________________ If it doesn't fit, jam it. If that doesn't work use a hammer. - Engineers Motto |
|||
| Top | |
|||
| twase |
|
|||
|
Walker wrote: twason wrote: Walker wrote: You're running a Poliauto, they are now known as Vialle and if you can find a new one below $800 i'll take 10 of them... Even a kit for it will cost you a small fortune! Replace it with an OMVL R90E, you'll never have a problem again. Brand new Vialle convertors are around $350-380 depending on the model, unless you buy from Ford where the $800 is more the figure you will pay.. You've said this once before and i told you i'll take 10 of them if you can get them. Ask for a price on a replacement Vialle to suit a Falcon. People don't buy them because they are minimum twice the price of anything else. I priced a Poliauto (Same as Vialle) 9 years ago and they were $550 back then, a kit for one was about $200, i ended up fitting a new BRC which cost me about $180 from memory and worked just as well as the Poli and was more reliable. Now i stick with OMVL.  ? There was no special price when I got mine and that included $15 delivery to Canberra. If you are seriously needing 10 I am sure they will do a better deal than that. 
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| samftr |
|
|||
|
does anyone know the cfm or cubic metres per hour the inline 6 needs for its gas converter?
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| MadMatt |
|
|||
|
I suffered no power loss with the the converter above
_________________ Member Number 8804 |
|||
| Top | |
|||
| Molloy |
|
|||
|
replace it,
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| cheersdude |
|
|||
|
Wouldn't bother putting a kit in it, for an extra $100 you can get a new convertor. I just fitted a Airod Convertor to my EF which has Tickford Gas, cost around $300.00..
_________________
|
|||
| Top | |
|||
| SlickNCGhia |
|
|||
|
my gas dude is looking for prices on an OMVL. aparently itll new all dif pipes than the poliauto ... which i expected anyway and he says that poli's r expensive and he usually replaces them with OMVL's as they are cheaper and seem a little better
_________________ NC Fairlane Ghia. AU engine. Pacemaker 4499. 2.5" Redback Zorst, tints, red dash. 17in ba xr (e-series). Suzuki Across (suzi) Sexy in Black |
|||
| Top | |
|||
| Macca |
|
|||
|
SlickNCGhia wrote: my gas dude is looking for prices on an OMVL. aparently itll new all dif pipes than the poliauto ... which i expected anyway and he says that poli's r expensive and he usually replaces them with OMVL's as they are cheaper and seem a little better
Well Walker just posted that OMVL is cheaper and better 
Walker is a mechanic, has his own business and as you will see is on the ball with mechanical problems. As for me, I am a mechanic, licensed for CNG/LPG, don't have my own business, can't stand even the thought of looking at an engine these days, that said, keep on listening to "Walker" and not me 
PS Walker is an old bastard too!
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| Walker |
|
|||
|
Nah Jase, i'm the same as you now LOL.... I hate lifting a bonnet these days, you know that sick feeling you get when you have to work on them?
|
|||
| Top | |
|||
| SlickNCGhia |
|
|||
|
aw thats no good. Tip for the kids never become a mechanic, soyou never hate working on cars.
_________________ NC Fairlane Ghia. AU engine. Pacemaker 4499. 2.5" Redback Zorst, tints, red dash. 17in ba xr (e-series). Suzuki Across (suzi) Sexy in Black |
|||
| Top | |
|||
| SlickNCGhia |
|
|||
|
he just told me that the omvl's had gone up a fair bit and were like 350 or something so like 550 installed or 600 for a poliauto installed. im gonna shop around abit
_________________ NC Fairlane Ghia. AU engine. Pacemaker 4499. 2.5" Redback Zorst, tints, red dash. 17in ba xr (e-series). Suzuki Across (suzi) Sexy in Black |
|||
| Top | |
|||
| Walker |
|
|||
|
$550 installed?
Sounds like a thief!!! |
|||
| Top | |
|||
| Macca |
|
|||
|
Walker wrote: $550 installed?
Sounds like a thief!!! You might be able to get some work out of this Paul Not that you would want to do it.
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| Walker |
|
|||
|
If he were over the Northern side of town i'd help him out, there isn't much in fitting a different convertor, how they can justify charging $200 on top of the profit he is making on the price of convertor has got me f**k.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
)