|
| DSTRBD |
|
|||
|
Hey guys,
Sitting round the fire talking with a few mates after a couple of stubbies, an idea came up and i thought i'd share it to see what you all think... I own a NC fairlane 5.0 on dual feul. It currently runs a impco 225 straight-through mixer and a L model converter. A mate of mine suggested removing the whole petrol, upper and lower manifold setup, replace it with either a performer or torker manifold and slap on my impco 425 which has a holley baseplate for a straight gas setup. Any opinions on this idea? pros? cons?
_________________ NO TV AND NO BEER MAKE HOMER GO SOMETHING SOMETHING... |
|||
| Top | |
|||
| MRE-50L |
|
|||
|
Stay tuned on this topic cause im doing that as we speak , ill let you knows how it goes
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| DSTRBD |
|
|||
|
damn it... and i thought i was gonna be doin something different... but good to see great minds think alike. even though mine was intoxicated beyond recognition!
nice LTD... also nice to see that the chrome moulding above the wheels are gone! hehe
_________________ NO TV AND NO BEER MAKE HOMER GO SOMETHING SOMETHING... |
|||
| Top | |
|||
| MRE-50L |
|
|||
|
rofl there going back on when i get new 1's Maybe
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| DSTRBD |
|
|||
|
NOOOOOOOOOO!!! NASTY! DISGUSTING! might as well get some personalized plates... CHP HOR (cheap whore)! hehehe...
cmon man... looks so much better without them!
_________________ NO TV AND NO BEER MAKE HOMER GO SOMETHING SOMETHING... |
|||
| Top | |
|||
| MRE-50L |
|
|||
|
"" SNEAK PEEK ""
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| DSTRBD |
|
|||
|
nice mounting of a TPS sensor... so what's next?
_________________ NO TV AND NO BEER MAKE HOMER GO SOMETHING SOMETHING... |
|||
| Top | |
|||
| Macca |
|
|||
|
hmm that intake looks familiar, I see you didn't need the adaptor.
How long before we see it on the road doing some testing.
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| DSTRBD |
|
|||
|
I just purchased a Parker 302 Funnelweb Intake manifold from the US... Cant wait!!!
Now apart from going the GRA route... do you think the Impco 425 will be sufficient? I want to try and NOT crack open the motor to get HP. Which leaves me to roller rockers, exhaust and intake. What else would I need to do to make it run? For the petrol side of things? Do I just go and remove the injector harness, petrol tank and hide the looms?
_________________ NO TV AND NO BEER MAKE HOMER GO SOMETHING SOMETHING... |
|||
| Top | |
|||
| jasonk |
|
||
|
i was thinking about doing the same, was going to use a megasquirt. the trans computer has two imput coming from the computer and i am not sure if these can be simulated with a megasquirt.if the ms can be used to control trans computer and timing everything on the fuel side can be removed.
just curious what happens apart fromthe obvious if you run out of fuel.is a tow the only option. can you buy some form of portable bottle like a fork lift that can be used when needed? |
||
| Top | |
||
| DSTRBD |
|
|||
|
No, by removing the fuel tank from under the car, I'm thinking bout fitting another gas tank under the car... of course if possible.
_________________ NO TV AND NO BEER MAKE HOMER GO SOMETHING SOMETHING... |
|||
| Top | |
|||
| tearlejc |
|
||
|
When I had my gas certified (gas only setup) they had to put some gas in an empty tank - they had a bbq bottle with an adapter on it which they filled up at the servo, probly totally illegal, but hey? They put a few $$ worth in the car so they could drive it round to the servo to fill up.
I saw the bottle, it really was as simple a setup as it sounds.....
_________________ 351 4V XB Coupe running LPG |
||
| Top | |
||
| DSTRBD |
|
|||
|
anyone with any good info on the Impco 425s?
_________________ NO TV AND NO BEER MAKE HOMER GO SOMETHING SOMETHING... |
|||
| Top | |
|||
| Macca |
|
|||
|
tearlejc wrote: When I had my gas certified (gas only setup) they had to put some gas in an empty tank - they had a bbq bottle with an adapter on it which they filled up at the servo, probly totally illegal, but hey? They put a few $$ worth in the car so they could drive it round to the servo to fill up.
I saw the bottle, it really was as simple a setup as it sounds..... Yep it is illegal, there is actual legal bottles to do this but that would probably incur a yearly bottle rental fee, BBQ bottle is cheap
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| Macca |
|
|||
|
DSTRBD wrote: I just purchased a Parker 302 Funnelweb Intake manifold from the US... Cant wait!!!
Now apart from going the GRA route... do you think the Impco 425 will be sufficient? I want to try and NOT crack open the motor to get HP. Which leaves me to roller rockers, exhaust and intake. What else would I need to do to make it run? For the petrol side of things? Do I just go and remove the injector harness, petrol tank and hide the looms? How much did you pick it up for? They have them in packages all the time in Ebay.au but there is a few going for $475 plus $30 postage. Link to Parker ebay search
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
)