G'day rev heads,

It's time for a cleanout so I'm going to have a Ford Garage Sale.
So from 9.00 a.m this Sunday. Pm me for the address and don't show up before 9.00 or I will literally shoot you!
Here's a list of some things.....

5.0 Forged piston short block (std bore)
5.0 HO intakes
5.0 Heater pipe
5.0 accessory brackets EB-L (many, various)
5.0 HO camshafts (stock)
5.0 HO t-bodies
5.0 HO 58mm EGR spacers
5.0 65mm t-body
5.0 HO EGR spacer bored out to 65mm (using a lathe not a f***in die grinder)
5.0 MAF
5.0 NF EECV Harness
5.0 TFI distributors
5.0/5.8 F-series accessory brackets
5.0 EB-D new alternator
5.0 Air boxes
5.0 NF engine mounts
5.0/5.8 rocker covers and steel shim O-ring rocker cover gaskets
5.0/5.8 F-series or '86-'93 Mustang T/cover & water pump x 2
5.8 F-series EFI intake x 2….one with T/body
5.8 F-series sump
5.8 7M one piece rear main std crankshaft
5.8 .010 under Sealed Power rod bearings
5.8 F-series exhaust manifolds
5.8 truck con rods
5.8 E7 heads
351W Pacemaker headers with 3" 316 collectors w/3 bolt flanges (near new)
302C std bore short (Black)
302C std bore short (Black)w/heads
302C heads x 4
Cleveland 4 barrel 2V Spread bore cast intake
Cleveland GMB alloy water pump (near new)
EA-ED V8 K-member and steering rack
Eaton M90 supercharger (ex T-bird SC)
ED XR8 3.27 LSD rear axle complete
plus lots of other stuff including EEC's, harnesses etc etc

and for $4500 extra I'll load the whole lot into my 5.0 XG panelvan and you can have that too

Damn man, now thats the sort of garage sale im talkin about!

Hey any chance you have the long bolts from the HO manifolds?

Probably....in fact I think I have brand new genuine ones.
also found some more stuff...
A Freshly bored .030" over D block without caps.
A complete '85 Bronco 351 engine.
BA2 GT centre and tail section stock exhaust.

If you have em, let me know and i'll pay you for them right away, im desperate for some

gonna need a big wheel burrow------any picks of the bits?

Che?

how much you asking for the 5.0 EB-D new alternator mate?
and lower half of eb ed v8 airbox if you got one?
cheers

ALt $180
I'll have to check which airboxes I have but I would sell it complete..not just half.

Hi mate,

could you please PM me a price on one of the F series 5.8 EFI intake manifolds ( one with T/B )
a pic of some sort would also be handy.

thanks chief.

$180 no pics.

ACtually here's an article I did on my poor old XR many years ago...it has a pic of the intake
http://www.trueblueford.com/66'XRfalcon ... ersion.htm

Wouldn't happen to have a working BEM to suit an EF Futura (blue) would ya?

Maybe...I gotta lotta harnesses with all sorts of modules attached to them.

,good while your sniffing around,can you keep a eye or two open for a ef v8 motor wiring harness or two,need various plugs and bits----heat and pulled apart badly----////wont say who,as i dont know-wear and tear,i havent seen many v8 in my patch,both my v8s are over 300k,thanks hans

If you notice any floating around let me know.
Mines starting to give me the s**t