Item: Mustang Single Turbo Kit
Description: "Boost Brothers" 5.0 Single Turbo Kit
Single Turbo kit to suit SN95 Mustang.
Purchased over a year ago, only unpackaged some parts to test fit on engine stand.
Never run and with all parts.
Planned to modify manifolds etc to suit E-Series Falcon but have changed plans.
this is a very comprehensive kit, all bolts, gaskets fittings come supplied.
Located in Carrum Downs - Victoria
Manifolds and Turbo on stock 5L.
Promo Image (Shows optional coating, these do not with coating)
A list of all parts that come with the kit.
* Left Stainless 94-95 GT 5.0 Header, V-Band termination, large diameter
* Right Stainless 94-95 GT 5.0 Header, V-Band termination, large diameter
* Stainless crossover pipe with v-band termination, stainless braided flex, 3" diameter
* Stainless down pipe with 3 02 sensor bungs - retain stock 02 sensors and add Wideband Sensor
* Stainless mid pipe, 3 bolt flanged
* Stainless splitter cat delete pipe
* 3x V-band (Turbo to DP, crossover to headers)
* BoostBrothers Custom Trim T67 -- 730WHP at 26PSI -- 4" inlet
* 38MM Tial Type wastegate - 6 psi spring installed
* 50mm V-Band Mount Tial Type BOV
* MIRROR POLISHED Intercooler piping - all ends bead rolled - couplers will not pop off
* All couplers are supplied - high quality nylon reinforced silicone, not rubber junk
* Stainless T-Bolt clamps for all clamps
* EGR Block off plate
o turbo mounting hardware
o Alloy Steel reduced head diameter header bolts
o Downpipe exh clamps
o FMIC hardware
o FMIC mounting brackets
o All Oil line fittings
+ tee fittings
+ supply barbs
+ drain barbs
+ AN fittings
+ oil supply flanges
* High quality braided stainless oil supply line - will not crack, break or burst
* High quality oil drain line - will not melt, kink or weep
* Large Bar and Plate FMIC 600x300x75mm
Some additional images
FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw
Last bumped by EFFalcon on Thu Nov 11, 2010 10:44 pm.
|Who is online|
Users browsing this forum: MSNbot Media and 8 guests