|
| needfordspeed |
|
||
|
Hey guys, got my intercooler setup up for sale as i'm upgrading to a bigger one, these came out with the AIT/AVO dealer fitted turbo kits. It doesn't require any holes in the engine bay and will be good for upto around 200rwkw, the cooler is kinda small but does it's job well. I think it's missing about two pipes, but I used some rubber pipes instead to make up for them, one of the pipes has a hole for an extra injector if you want to run that as well.
Only have one pic of the cooler atm but can post some up of the pipes too. I'm after $200, located in Melbourne, but will post to anywhere in Aus for $30.  This is how the piping is run, as you can see you don't have to cut any holes: 
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| TimmyA |
|
|||
|
Hello,
The included Hoses suit an E series? Do they hang very low under the front of the radiator support? Thanks, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| needfordspeed |
|
||
|
G'day it doesn't hang low at all, it'll be hidden behind your stock front bar. I had it running on my EA, I don't want to provide the extra hoses I used, pretty much because it was a cheap and nasty way of getting it running, but the next buyer could buy some proper pipes or rubber hose. But it will come with most of the pipes, you'll need about two extra.
BTW, here's a video if you wanna know what the dose will sound like   Was the first night it was running.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| needfordspeed |
|
||
|
I also have a 7 injector fuel rail which can be used for the injector but that will be extra.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| Riding_The_Lightning |
|
||
|
can the pipes be easily routed to the throttle body and outlet on the turbo
|
||
| Top | |
||
| madeaspack |
|
||
|
how much for the intake?
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| needfordspeed |
|
||
|
Riding_The_Lightning wrote: can the pipes be easily routed to the throttle body and outlet on the turbo Yeah easy as, took me about 10 mins (if that) to take it all off tops. madeaspack wrote: how much for the intake? Which intake? If you're talking about the airbox which is located on the other side for the AIT/AVO setups (where the battery tray goes) It's not up for sale as of yet, but can be yours for the right offer.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| TimmyA |
|
|||
|
Do you have a photo of what it all actually looks like under the bonnet?
The throttle body connections, turbo connections, and airbox? I assume that by the right offer the airboxes are worth a fair bit of money? Thanks, TIm
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| needfordspeed |
|
||
|
I don't have any pics of it on the car because I didn't take any of it, but you'll get an idea from this pic:
http://i221.photobucket.com/albums/dd13 ... rt_001.jpg I'll leave it up for sale for a bit longer if it doesn't sell i'm just gonna keep it.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| Riding_The_Lightning |
|
||
|
so which pipes exactly does it come and not come with?
|
||
| Top | |
||
| needfordspeed |
|
||
|
SOLD
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
