have got a ED XR6 head which has been chemicly cleaned and stripped ready for re-co. would only need the valves faced, head skimmed and the seats syncroed. comes with the proper rocker cover in good condition, EF XR6 cam and proper valve springs. pic 1 pic 2

after $350

Go Fast Bits BOV. mach 1 type. link is here rrp price is $300, has had little use. comes complete in box minus the "weld on adapter" which is only a short peice of steel tube. any engineering shop would probably have a off cut in the correct size you could get for peanuts. its a blue one like in the link picture.

after $150

Ford/Tickford rocker cover badge which came on the EL XR6 motors only. it has a crease on the top left corner but isnt that bad. will supply it with a new peice of double sided tape so you can stick it straight on.
pic

after $20

Last edited by John_xr6 on Wed Aug 16, 2006 5:44 pm, edited 2 times in total.

Ford/Tickford rocker cover badge which came on the EL XR6 motors only. it has a crease on the top left corner but isnt that bad. will supply it with a new peice of double sided tape so you can stick it straight on.


"damage" is hardly noticable

were's the pictures?

updated with pics, also its hard to see the crease line in the pic but its there.

twr7cx, got your PM but i got another one last night for it. if it falls through ill let you know.

well i hope it falls through then!