Fordmods Logo

nsw cms stage3 cam. 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: nsw cms stage3 cam.
Posted: Tue Apr 21, 2009 2:16 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

hi
ive got a stage 3 cms re-grind cam to suit ea to el.
its ground onto a 94da cam
has done about 500kms since it was ground.
was removed due to a bottom end failure.
power is from aprox 2500rpm untill redline (depending how its dailed).
this has a slight lope at idle & still is ECU freindly. SOUNDS GREAT AT IDLE..
to purchase the cam from cms on its own is $205.00 (exchange)
asking for $120.
prefered pick up but will post for around $25

here is a sound clip of it when it was in the car.
http://www.youtube.com/watch?v=a0HCHG9t-v0

 

 

Attachments:
DSC01395.JPG
DSC01395.JPG [ 198.95 KiB | Viewed 22 times ]
Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Tue Apr 21, 2009 2:30 pm 
Getting Side Ways
Offline
User avatar

Age: 28

Posts: 5889

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: '14 Grand Cherokee

Location: Port Lincoln
SA, Australia

im interested troyman. you say its for a 94da head. i have a 96DT, it'll work the same yeah?

 

_________________

11/93 ED OPT20 GLi | Full Boat Spec

Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Tue Apr 21, 2009 2:34 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

being a tickford head yes it would..
aslong as its not a hybrid engine. if its a hybrid engine you will need to use ef rockers..
Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Tue Apr 21, 2009 2:35 pm 
Getting Side Ways
Offline
User avatar

Age: 28

Posts: 5889

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: '14 Grand Cherokee

Location: Port Lincoln
SA, Australia

nope, its not a hybrid engine. i'll check on funds and let you know.

 

_________________

11/93 ED OPT20 GLi | Full Boat Spec

Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Tue Apr 21, 2009 2:53 pm 
Getting Side Ways
Offline
User avatar

Age: 28

Posts: 5889

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: '14 Grand Cherokee

Location: Port Lincoln
SA, Australia

PM Sent.

 

_________________

11/93 ED OPT20 GLi | Full Boat Spec

Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Tue Apr 21, 2009 3:47 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

sold pending payment...
Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Tue Apr 21, 2009 3:50 pm 
Smokin em up
Offline

Posts: 244

Joined: 6th Apr 2008

Location: Melbourne
VIC, Australia

let me know if sale falls through im interested :D
Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Wed Apr 22, 2009 10:31 am 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

NOW SOLD..................
Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Wed Apr 22, 2009 2:08 pm 
Getting Side Ways
Offline
User avatar

Posts: 659

Joined: 14th Apr 2006

Ride: EF Fairmont Sedan

Power: 180 rwkw

Location: Ferntree Gully
VIC, Australia

alfy wrote:
im interested troyman. you say its for a 94da head. i have a 96DT, it'll work the same yeah?
I thought a 96DT head was a Hyrbid Head?

Hybrid Cylinder Head identified by 96DA or 96DT casting

As seen here - note the easiest way to know that you have a hybrid head if you dont believe the casting numbers is that the Valve Springs are larger at the bottom than the top - see pic
Image

 

_________________

PROEF 13.46 @ 105.78mph - 1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan
Stock Fuel Pump, 29lb Injectors, JMM Street Series Headers, 2.5" Exhaust, 205rwkw

Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Wed Apr 22, 2009 2:44 pm 
Getting Side Ways
Offline
User avatar

Age: 28

Posts: 5889

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: '14 Grand Cherokee

Location: Port Lincoln
SA, Australia

i cant remember if mines 95 or 96 DT, its a 1997 model so its not hybrid.

 

_________________

11/93 ED OPT20 GLi | Full Boat Spec

Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Wed Apr 22, 2009 3:16 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

even if it is a hybid you only need ef rocker assenbly for it to work
Top
 Profile  
 
 
 Post subject: Re: nsw cms stage3 cam.
Posted: Wed Apr 22, 2009 7:07 pm 
Getting Side Ways
Offline
User avatar

Posts: 659

Joined: 14th Apr 2006

Ride: EF Fairmont Sedan

Power: 180 rwkw

Location: Ferntree Gully
VIC, Australia

alfy wrote:
i cant remember if mines 95 or 96 DT, its a 1997 model so its not hybrid.
02/98 EL plus had hybrid heads - i was going on you said it was a 96DT - easy to check - take the drive velt cover off and have a look at the number :)

TROYMAN wrote:
even if it is a hybid you only need ef rocker assenbly for it to workeven if it is a hybid you only need ef rocker assenbly for it to work
Yeah as above

 

_________________

PROEF 13.46 @ 105.78mph - 1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan
Stock Fuel Pump, 29lb Injectors, JMM Street Series Headers, 2.5" Exhaust, 205rwkw

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 13, 2017 6:41 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names