Item: Heaps of various 3" intercooler/intake pipes - ally, silicone, Turbosmart, CAPA, Monz
Price: Various - see next to each item
Type: Part
Condition: New

Description: Various bits and pieces left over for a few air intakes and intercooler piping set ups from the past.


Turbosmart:

2x TF-HS-300750BE – 3” blue 75mm long silicone hoses (the darker ones ID is about 2/3mm smaller than the other, and the lighter one’s wall thickness is about 2mm thicker – seems since they were manufactured at different times Turbosmart have made some changes)- $8.25 each.
2x 3” blue approximately 50mm long silicone hoses - $6.00 each.
For more details, check out the manufacturers webpage at http://www.turbosmart.com.au/index.php?id=40 .




Autotecnica Monza:

PIPE 45/76 45* Silicone Pipe 76mm (3”) ID blue hose - $40.00.
2x 150mm Long Blue Silicone Pipe 76mm (3”) ID In and Out - $20.00 each.
For more details, see the manufactures webpage at http://autotecnica.com.au/performance_3.html .




CAPA:

3” Aluminium Discharge Tube bent tube with rubber grommet to suit Bosch black plastic BOV - $54.45 ono.



C.G.S. (Made in the U.S.A.) 3” 90 Degree Rubber Angle - $21.70.



For more details, see the manufacturers webpage at http://www.capa.com.au/capa_performance_intake.htm .


RapidSystems.com.au:

These are all aluminium pieces – 3”/76mm ID and 2mm thick walls – these are brand new and still in there protective wrapping.

180* bend (approximately 30cm width across) - $35.00.



2x 45* bend - $27.00 each.



2x straight 40cm long - $25.00.



6x off cuts – approximately 30mm, 63mm, 77mm, 88mm, 96mm and 100mm - $offer.



For more details see the manufactures webpage at http://www.rapidsystems.com.au/ .


Other:
Purple Pig 3” silicone hose blue – approximately 150mm long - $10.00.
Purple Pig 3” silicone hose blue - approximately 50mm long - $3.00.



(CAPA?) Black rubber hose 3” – approximately 80mm long - $offer.
(TFI brand?) Black rubber hose 3” – approximately 65mm long - $offer.
(TFI brand?) Blue rubber hose 3” – approximately 65mm long - $offer.



(TFI brand?) chrome 3” 90* bend – 1 end has been flared up approximately an additional 8mm (perfect fit into the black Ford 90* intake pipe on the throttle body on an EL I6) - $25.00.



(TFI brand?) air filter/air intake support/mounting bracket has been twisted 90* - $5.00.



3” mild steel 180* bend with stainless steel Turbosmart Type III BOV adapter fitted - $15.00.

(TFI brand?) air filter/air intake support/mounting bracket has been twisted 90* - $5.00. is mine!!!!

pm sent