Fordmods Logo

302 single turbo recomendations 

 

Page 3 of 3 [ 38 posts ] Go to page Previous  1, 2, 3

 
 Post subject: Re: 302 single turbo recomendations
Posted: Wed Dec 12, 2012 7:06 pm 
Smokin em up
Offline

Age: 33

Posts: 249

Joined: 18th Jan 2010

Ride: Ford EB GLI

Location: Morwell/Inverloch
VIC, Australia

Know one has said GTX3582r yet? I thought that would be the obvious choice. Good for over 400rwkw on pump fuel. You say you were looking at a GT42r? This turbo is capable of over 650rwkw, How much head room are you looking for exactly?

 

_________________

EBT-747 -

Top
 Profile  
 
 
 Post subject: Re: 302 single turbo recomendations
Posted: Wed Dec 12, 2012 8:56 pm 
Getting Side Ways
Offline

Age: 42

Posts: 9452

Joined: 9th Nov 2004

Gallery: 4 images

Ride: Fordrunner 5.0 Turbo

Location: Wollongong
NSW, Australia

I'm basically trying to get as close to 300rwkW with boost and boost alone. As for headroom I don't want the turbo to be at under 70% efficiency when I'm at said boost level.
I also want to be able to dial it back to around 8-12 psi and still have some decent efficiency as some turbo's aren't even in their second efficiency island until at least 12psi boost.

With the GT 30 series turbo's (35, 37 in particular) they all have T3 flanges. The general consensus for a V8 is T3 for twin turbo and T4 for single ortherwise back pressure tends to become an issue. If this holds true I'm up for nearly a grand for a new rear housing. I could get at least 3 turbonetics rear housings for the same price.
The 35X82R comes without a rear housing so by the time you have a complete unit that's 3 grand. I'd be expecting block splitting torque from idle to 7000rpm+ if I was going to spend that much on a turbo.

Has anyone run a regular GT 3582R on a stock 302 and what was the boost threshold like?
Top
 Profile  
 
 
 Post subject: Re: 302 single turbo recomendations
Posted: Wed Dec 12, 2012 9:45 pm 
Getting Side Ways
Offline

Age: 42

Posts: 9452

Joined: 9th Nov 2004

Gallery: 4 images

Ride: Fordrunner 5.0 Turbo

Location: Wollongong
NSW, Australia

What about the GT3788?
Its the smallest of the GT turbos with a T4 flange and sits between the 3582 and 4088.

The compressor map looks reasonable too.

http://www.himni-racing.com/images/GT3788R_comp_e.jpg

Pretty much perfect for what I'm after.
Just wonder what the boost threshold on a 5.0 would be like.
Top
 Profile  
 
 
 Post subject: Re: 302 single turbo recomendations
Posted: Thu Dec 13, 2012 5:35 pm 
Getting Side Ways
Offline

Age: 42

Posts: 9452

Joined: 9th Nov 2004

Gallery: 4 images

Ride: Fordrunner 5.0 Turbo

Location: Wollongong
NSW, Australia

Well a decision has been made. GT3582R with a 1.06 A/R
I popped in to see freddy this arvo in regards to a turbonetics T66. Since they only make them with HP compressor wheels these days all of the compressor maps on their website are out of date. He doesn't like the HP wheels on a street car cause they are designed for pressures above 30psi.

I asked him for his thoughts and availability on a 3582R and he smiled and pulled one out of a box. He then adressed any concerns I had with the T3 housing by pointing me to a few big hp xr6t's that flow alot more than my 4-500hp target. Price is $1800 and I'm looking to pick it up either tomorrow or monday. All I can say is man its a compact unit for what it can flow. A perfect fit for the limited space in the fordrunner engine bay.

Also in keeping with the compact size theme he said he'd do me a deal on a turbosmart 40mm comp gate. Is 40mm decent or should I be looking at stepping up to a 50mm gate?
Top
 Profile  
 
 
 Post subject: Re: 302 single turbo recomendations
Posted: Thu Dec 13, 2012 6:15 pm 
Smokin em up
Offline

Age: 33

Posts: 249

Joined: 18th Jan 2010

Ride: Ford EB GLI

Location: Morwell/Inverloch
VIC, Australia

Good choice. That gate should be fine with the power levels your looking at. If the 50mm isnt much more $$ just get it anyway for when the future power bug bites :P

 

_________________

EBT-747 -

Top
 Profile  
 
 
 Post subject: Re: 302 single turbo recomendations
Posted: Sun Dec 16, 2012 10:39 pm 
Getting Side Ways
Offline
User avatar

Age: 57

Posts: 918

Joined: 6th Aug 2007

Gallery: 4 images

Ride: BA XR8

Location: Kellyville
NSW, Australia

Michael (HYPOEB) wrote:
Good choice. That gate should be fine with the power levels your looking at. If the 50mm isnt much more $$ just get it anyway for when the future power bug bites :P

here, here.......better to go with the 50mm gate.......mine is 50mm, and no boost probs....

 

_________________

BA XR8 Boss 260
DAZFAB......Now Mobile
Mink = GAY
DAZFAB MEMBERS ,,,,DA22LE, XTT909, TERRORISTGHIA, TROYMAN, SWC, FAT245

Top
 Profile  
 
 
 Post subject: Re: 302 single turbo recomendations
Posted: Mon Dec 17, 2012 1:08 pm 
Getting Side Ways
Offline

Age: 42

Posts: 9452

Joined: 9th Nov 2004

Gallery: 4 images

Ride: Fordrunner 5.0 Turbo

Location: Wollongong
NSW, Australia

I've already bought the 40mm gate. What's your schedule like for january daz? Its time tobdo this
Top
 Profile  
 
 
 Post subject: Re: 302 single turbo recomendations
Posted: Mon Dec 17, 2012 9:30 pm 
Getting Side Ways
Offline
User avatar

Age: 57

Posts: 918

Joined: 6th Aug 2007

Gallery: 4 images

Ride: BA XR8

Location: Kellyville
NSW, Australia

Be ok after the 7th.........

Having a well earned break.....

 

_________________

BA XR8 Boss 260
DAZFAB......Now Mobile
Mink = GAY
DAZFAB MEMBERS ,,,,DA22LE, XTT909, TERRORISTGHIA, TROYMAN, SWC, FAT245

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 3 of 3  [ 38 posts ]  Go to page Previous  1, 2, 3

Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 1:50 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names