Fordmods Logo

couple of quick questions bout my turbo build 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: couple of quick questions bout my turbo build
Posted: Sat Mar 03, 2012 5:56 pm 
Stock as a Rock
Offline
User avatar

Age: 25

Posts: 128

Joined: 13th Jan 2011

Ride: ED XR6

Location: Emerald
VIC, Australia

can someone tell me how to rotate the center of my turbo so i can get the oil inlet ontop and the drain on the bottom? do you just take the four bolts out and rotate it round to the next bolt holes if that makes sense? and close to top and bottom do they have to be?

Image

and also is an EA log intake manifold the same as an ED one? and has anyone ever got any porting/polishing done to these as i have another one sitting i was going to get painted..
cheers
Top
 Profile  
 
 
 Post subject: Re: couple of quick questions bout my turbo build
Posted: Sat Mar 03, 2012 6:44 pm 
Getting Side Ways
Offline
User avatar

Age: 24

Posts: 3355

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

as you said undo the bolts and rotate it around until its where u want it .
log manifold should be the same, you can get it port matched so it matches with the ports on the head

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: couple of quick questions bout my turbo build
Posted: Sat Mar 03, 2012 7:03 pm 
Stock as a Rock
Offline
User avatar

Age: 25

Posts: 128

Joined: 13th Jan 2011

Ride: ED XR6

Location: Emerald
VIC, Australia

Cheers mate can u just loosen and spin it or do you have to pull the bolts all the way out and and rotate it round to the next bolt holes.. and also is there any benefit from getting them port matched?
Cheers
Top
 Profile  
 
 
 Post subject: Re: couple of quick questions bout my turbo build
Posted: Sat Mar 03, 2012 7:12 pm 
Getting Side Ways
Offline
User avatar

Age: 24

Posts: 3355

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

On a turbo I had I could loosen them as it had a spit plate holding it . Some have a big circlip .
But I'd say you'd have to take out the bolts.

I guess you would have more flow .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: couple of quick questions bout my turbo build
Posted: Tue Mar 06, 2012 11:54 pm 
Getting Side Ways
Offline
User avatar

Posts: 627

Joined: 5th Dec 2009

Gallery: 2 images

Ride: GREEN ED XR6

Power: 249 rwkw

Location: CENTRAL WEST QLD
QLD, Australia

Please dont tell me thats a china turbo? If interested I have a full kit for sale ecu, injectors, pump, turbo, manifold, wastegate, intercooler and piping etc.

But if it is a china turbo it wont last long, I have 3 here that were given to me due to there failure. Perfect door stoppers in the shed lol

 

_________________

AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED

Top
 Profile  
 
 
 Post subject: Re: couple of quick questions bout my turbo build
Posted: Wed Mar 07, 2012 9:48 pm 
Getting Side Ways
Offline
User avatar

Age: 63

Posts: 3552

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

VS racing have some cheap Magestic 70mm turbo's for sale in U.S..
Well under $900 delivered.. 64mm will do the job also..
Being that the XR6T is 61mm...
http://www.theturboforums.com/smf/spons ... y-to-ship/
They don't list them.. But have them...
http://www.vsracing.net/catalog/product ... 2704a0a699

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
 Post subject: Re: couple of quick questions bout my turbo build
Posted: Sat Mar 10, 2012 8:16 pm 
Stock as a Rock
Offline
User avatar

Age: 25

Posts: 128

Joined: 13th Jan 2011

Ride: ED XR6

Location: Emerald
VIC, Australia

Dont stress its a garrett, are you willing to seperate your kit xr6poly?
Top
 Profile  
 
 
 Post subject: Re: couple of quick questions bout my turbo build
Posted: Sat Mar 10, 2012 8:17 pm 
Stock as a Rock
Offline
User avatar

Age: 25

Posts: 128

Joined: 13th Jan 2011

Ride: ED XR6

Location: Emerald
VIC, Australia

Dont stress its a garrett, are you willing to seperate your kit xr6poly?
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 09, 2016 10:57 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names