|
| DazzaOrangeXR6 |
|
||
|
Ive been bored and am soon going to start to build a custom big mouth induction for my BA XR6 made out of alluminium. Just wondering if anyone has ideas to make it better, or tips anything like that.
cheers |
||
| Top | |
||
| Busso |
|
|||
|
Make the opening of it big like the vs commodore ones lol, they go the whole length of the bonnet almost
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| DA22LE |
|
|||
|
Cut a big hole in the bottom of the box, and the inner guard, and run a big flex hose into it from behind the front bumper, a lot less work, and just as much benefit. Have a look on autospeed for the diy cold air intakes, a lot of good info there.
Cheers  Daz
_________________ BA XR8 Boss 260 |
|||
| Top | |
|||
| BFXR6T |
|
||
|
Quote: Cut a big hole in the bottom of the box, and the inner guard, and run a big flex hose into it from behind the front bumper, a lot less work, and just as much benefit. Have a look on autospeed for the diy cold air intakes, a lot of good info there.
That's the go. The XR8's and FPV's run something similar to that. As an added bonus, you could choose to put the snorkle down directly into the air flow. But be careful, this may cause your filter to bolck quicker and may (not will, MAY) duct water into the inlet tract should you leave it open in wet conditions. |
||
| Top | |
||
| DazzaOrangeXR6 |
|
||
|
i actually have a growler intake now but when i put that in you can still have the small snorkle so i thought y not make a bigger one of them for more air.
|
||
| Top | |
||
| festymick |
|
||
Posts: 152 Joined: 15th May 2008 |
I know it may not be applicable, but thought this may (or may not!
 )be of help.
|
||
| Top | |
||
| Alex_01 |
|
||
|
DA22LE wrote: Cut a big hole in the bottom of the box, and the inner guard, and run a big flex hose into it from behind the front bumper, a lot less work, and just as much benefit. Have a look on autospeed for the diy cold air intakes, a lot of good info there.
Cheers Daz What he said.. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
