Fordmods Logo

Home » Forums » Fordmods Tech » Forced Induction Workshop

External Wastegates VS Internal Wastegates 

 

Page 1 of 1 [ 12 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
xr8boi
 Post subject: External Wastegates VS Internal Wastegates
Posted: Sat Apr 02, 2011 12:54 am 
Oompa Loompa
Offline

Age: 37

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia
Hi everyone just wondering whats better, Internal Or External wastegates?

Im building a 347 stroker twin turbo for my xr8 and im still deciding what turbos to use.
Top
 Profile  
 
 
EBXR8380
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Sat Apr 02, 2011 9:28 pm 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia
With TWINS an internal on each turbine will work fine..
62mm 76 trim .63 AR Precision turbo's..T3/4's...
More compact also..
Use nice big dump pipe to assist in good turbine / wastegate flow..
I can run as low as 8lb all the way to 18Lb with EBC with no issues..
270 rwkw to 480 rwkw with a turn of a dashpot inside car..

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....
Top
 Profile  
 
 
xr8boi
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Sun Apr 03, 2011 12:45 am 
Oompa Loompa
Offline

Age: 37

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia
How are the SC61 turbos that you have on your car?
Top
 Profile  
 
 
xr8boi
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Sun Apr 03, 2011 1:02 am 
Oompa Loompa
Offline

Age: 37

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia
I have been looking at these turbos

http://www.pcpa.com.au/index.php?main_p ... 24e93c8e19

im making the manifolds myself and hopefully i can con my boilmaker mate into helping aswell so it wont be too much drama. I had a XR6 turbo and i had the boost set at 10psi but the boost gauge use to read at 16 psi at full boost.
Top
 Profile  
 
 
EBXR8380
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Sun Apr 03, 2011 10:07 pm 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia
xr8boi wrote:
How are the SC61 turbos that you have on your car?


GREAT .. Mine are speced with ballbearing centre..
On a std block I suggest smaller trim on turbine wheel to bring on boost sooner..

A "single" Master Power T70 is alittle big on 5.0 engines...
But they work very well !!! For a budget turbo...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....
Top
 Profile  
 
 
xr8boi
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Sun Apr 03, 2011 10:27 pm 
Oompa Loompa
Offline

Age: 37

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia
Oh yeah im getting a dart block stroker from ford strokers and afr heads. Hopefully i can get some good power out of it. With this setup what turbos would you suggest?
Top
 Profile  
 
 
EBXR8380
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Tue Apr 05, 2011 12:32 am 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia
$$$ GT4202 would be my choice..

A 80mm S480 Borg warner 1.10 A.R..

Depending on engine size...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....
Top
 Profile  
 
 
EBXR8380
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Tue Apr 05, 2011 12:32 am 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia
Twins ?? Two GT3540's or T04Z with external gates..
Two Precision SC62 ??

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....
Top
 Profile  
 
 
xr8boi
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Tue Apr 05, 2011 8:10 am 
Oompa Loompa
Offline

Age: 37

Posts: 34

Joined: 13th Feb 2011

Ride: 1994 EF XR8

Location: Rockhampton
QLD, Australia
Is there an australian dealer for the Precision turbos or do i have to get them from america?
Top
 Profile  
 
 
EBXR8380
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Tue Apr 05, 2011 11:23 pm 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia
In nearly every quote I found I couldn't buy here even close to the price including freight..
I buy mine through VS racing ...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....
Top
 Profile  
 
 
EBXR8380
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Tue Apr 05, 2011 11:30 pm 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia
In nearly every quote I found I couldn't buy here even close to the price including freight..
I buy mine through VS racing ...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....
Top
 Profile  
 
 
EBXR8380
 Post subject: Re: External Wastegates VS Internal Wastegates
Posted: Tue Apr 05, 2011 11:44 pm 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia
Vs Racing through this site...
http://www.theturboforums.com/smf/index ... c=148027.0
Strange they don't list too many Precision turbo's on there site..

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 12 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » Forced Induction Workshop

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 20, 2024 11:01 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names