|
| gryph |
|
|||
|
turbotrana wrote: How is that plenum bolted on. Do you have to drill out the threads on the bottom half and bolt from the underside.
Looks like a good manifold, any pics from the underside Spot on with the drill n bolt from under, will have some underside pics tomorrow hopefully. 2-3 day wait to make em. |
|||
| Top | |
|||
| Froudey |
|
||
|
reading this topic, i might go to the wreckers and get a bare intake manifold and try and make one of these things but i think i would have to take into consideratation hmmmm
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| turbotrana |
|
||
|
I've taken the guts out of the EF manifold, butterfly plates and cut out all the ally in the the inlet area to make it one big hole (got pic but dont know how to put up here). Each hole entry is being shaped into a bell mouth.
Now gotta work out plenum, whether to have a bolt on one or just weld a plenum on. I think to get the most out of this manifold the guts have to be taken out and just bolting on a nizpro manifold with no manifold mods is not the best way to go. The manifold shown above with the guts taken out and bellmouthed would give better results IMO
_________________ Turbo 6s rule |
||
| Top | |
||
| gryph |
|
|||
|
For the pics goto www.imageshack.us uploadem to there and they will give u a forum link for u to put in a post.
|
|||
| Top | |
|||
| JOSE |
|
|||
|
anyone considered making one like drif6 uses?
_________________ Because i can. |
|||
| Top | |
|||
| turbotrana |
|
||
|
will this work
_________________ Turbo 6s rule |
||
| Top | |
||
| turbotrana |
|
||
|
I took the guts out with my new plasma cutter, thats why the very left port is rough. It took a few minutes to cut the ally out. That machine is brilliant cause otherwise would have been a pain in the a** and time consuming.
Thanks for the photo posting info
_________________ Turbo 6s rule |
||
| Top | |
||
| fritzz |
|
|||
|
yeh thats wat i did to myne.
_________________ # 1997 EL Falcon GLI - 600+rwkw |
|||
| Top | |
|||
| ef_frmnt |
|
||
|
Yeah i have a spare manifold of an ef and im considering just taking as much meat as i can out of the lower half and turning the throttle body around the same as drif 6.. might not be a massiv increase in hp but its nearly a metre less of piping to get up an around to stock position. and its cheaper than the nizpro one.
I heard a few whispers that snortperformance was going to make a few cast alloy plenums similar to nizpro style so maybe get onto them and heckle for a while with enough interest they might start making more. |
||
| Top | |
||
| ef_frmnt |
|
||
|
sry double post please delete.
|
||
| Top | |
||
| tjb45 |
|
|||
|
Have a look, But I'm sure its not just a case of bolting the top half on the other way. Last Time I looked it was nearly impossible.. Bolt holes dont line up, and a heap of other problems.
|
|||
| Top | |
|||
| ef_frmnt |
|
||
|
no no i meant cutting an welding the throttle body mounting position...
|
||
| Top | |
||
| FPV_GTp |
|
||
|
hi
any new planum designs and exhaust manifolds , anyone post pics please cheers
_________________ WANTED - Complete BTr4 and zf 6hp26 automatic transmission 6 cylinder and V8 transmission(s) suit rebuild? Drop me a PM if you can help would be greatly appreciated - thanks |
||
| Top | |
||
| ebs_4l |
|
||
|
well, we made this style for the xr6t... have sold two of them so far
and this was my exhaust manifold, i forget what you have and havent seen, been a while since you were active in here 
or you could go for something like this 
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| TURBO_GHIA |
|
|||
|
when you gonna make them for EL guys ,i reckon there's a lot more people with EL's then BA's
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
