Fordmods Logo

info about huge 4.0L turbo project gold coast QLD 

 

Page 2 of 7 [ 100 posts ] Go to page Previous  1, 2, 3, 4, 5 ... 7  Next

 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Wed May 05, 2010 11:56 pm 
Getting Side Ways
Offline

Age: 29

Posts: 638

Joined: 16th Feb 2005

Ride: EA Turbo

Location: Melbourne
VIC, Australia

BTW Gtech use 6BOOST.

 

_________________

1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Wed May 05, 2010 11:57 pm 
Getting Side Ways
Offline
User avatar

Posts: 807

Joined: 28th Oct 2008

Location: melburn
VIC, Australia

lets not forget jasons manifolds :)
he makes some of the best, very fkn sexy

 

_________________

XG Panelvan
mild engine, EL ECU & J3, HI6 & MSD coil

in the shed - .595" lift cam, GT4202, forged AU engine, ems 4424 ecu, glide & 5500 stall - next-bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU, J3 chip, wideband & logger, ported BBM, 3" intake

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Wed May 05, 2010 11:57 pm 
Getting Side Ways
Offline

Age: 29

Posts: 638

Joined: 16th Feb 2005

Ride: EA Turbo

Location: Melbourne
VIC, Australia

Dansedgli wrote:
Snort Performance wrote:
so rebuilt engine and retune from rajab didnt do anything 67rice !!

the 11.7 was done with stock high klm engine tuned by the dyno wog with gt3582r



He went 11.2 with snort gear and a 35/40. His first 10 (10.7) was with the new motor, new plenum, new auto and a GT42. Maybe a new intercooler and ECU in there too. Its hardly a fair comparison.

http://www.boostedfalcon.net/viewtopic. ... &start=160


Don't think the 10.7 was with the new plenum, and was definitely with a BTR.

 

_________________

1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Wed May 05, 2010 11:59 pm 
Commercial Sponsor
Offline
User avatar

Posts: 123

Joined: 27th Sep 2007

Ride: eb-twin turbo

Location: albury/wodonga
VIC, Australia

lol the so callled cracked/warped manifold was sold on here along with his gt3582r when he upgraded to the 6 boost gt42r combo ect ect

are we still forgetting the ea fitted with log turbo manifold gt3582r and stock log manifold intake also did 9 sec pass????

why is it you guys need to constantly promote 6-boost etm whenever there is a post about snort product or customers

lifetime warranty is marketing idea more then anything , if you have ever built a turbo manifold you would find if made correct will hold together for many many years , but lets be honest mild steel steam pipe delaminates over time regardless if it has lifetime warranty you thick the same applies to s/steel steam pipe????

 

_________________

Snort Snort, we make our own speed!!!!!

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:05 am 
Commercial Sponsor
Offline
User avatar

Posts: 123

Joined: 27th Sep 2007

Ride: eb-twin turbo

Location: albury/wodonga
VIC, Australia

needforspeed i have no doubt if the guys at g-tech have seen our current turbo manifolds/plenums they will be converted time will tell ;)

there are many big name workshops we have worked with over the years and more to follow

we have more turbo manifolds/kits sold in oz then anyone else yet we remain the smallest why we dont rip people off

 

_________________

Snort Snort, we make our own speed!!!!!

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:06 am 
Getting Side Ways
Offline

Age: 29

Posts: 638

Joined: 16th Feb 2005

Ride: EA Turbo

Location: Melbourne
VIC, Australia

Tim Jetson wasn't running a typical log style manifold, the runners were real short and all pointed towards the flange, similar to XR6T/AIT manifolds.

 

_________________

1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:07 am 
Fordmods Addict
Offline
User avatar

Age: 31

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia

1. 6boost - gtech 8.7
=1. ???? - Sammut 8.7
2. 6boost - Sinan/Hiboost 9.6
3. log - mikes ea 9.8? or 9.9 sooo long ago
4. JMM - JMM 9.9


who else is there?

 

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:11 am 
Getting Side Ways
Offline

Age: 34

Posts: 3406

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

needfordspeed wrote:
Don't think the 10.7 was with the new plenum, and was definitely with a BTR.


I was guessing from reading what he wrote, which wasnt very much. Everyone else does it. :P

Im sure he will be on here to tell us what his specs were soon.
Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:12 am 
Getting Side Ways
Offline

Age: 29

Posts: 638

Joined: 16th Feb 2005

Ride: EA Turbo

Location: Melbourne
VIC, Australia

Snort Performance wrote:
needforspeed i have no doubt if the guys at g-tech have seen our current turbo manifolds/plenums they will be converted time will tell ;)

there are many big name workshops we have worked with over the years and more to follow

we have more turbo manifolds/kits sold in oz then anyone else yet we remain the smallest why we dont rip people off


I would love to see some comparisons, and if you were right it'd shut everyone up. Many high profile workshops (they sell world wide) are already using 6BOOST manifolds, I guess his results are very good!

 

_________________

1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:14 am 
Commercial Sponsor
Offline
User avatar

Posts: 123

Joined: 27th Sep 2007

Ride: eb-twin turbo

Location: albury/wodonga
VIC, Australia

needforspeed i know what tim jetson was running in his car better then you!! i have been turbocharging falcons before 6 boost and etm!!!!

enough dribble boys show me where how the 6 boost or etm manifold design is better then snorts
in ANY way

 

_________________

Snort Snort, we make our own speed!!!!!

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:18 am 
Commercial Sponsor
Offline
User avatar

Posts: 123

Joined: 27th Sep 2007

Ride: eb-twin turbo

Location: albury/wodonga
VIC, Australia

you seem to like 6 boost soo much go and purchase a manifold and i will be happy to come down for the side/side comparison both you and i can be present ;) to be sure no dodgy s**t goes on

in fact maybe lets get etm 6-boost and snort manifold , lineup mag like street fords for back/back tests would make for a great read

 

_________________

Snort Snort, we make our own speed!!!!!

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:20 am 
Getting Side Ways
Offline

Age: 29

Posts: 638

Joined: 16th Feb 2005

Ride: EA Turbo

Location: Melbourne
VIC, Australia

OK...after all this time, look at 6BOOST and look at ETM.

Good on ya mate.

 

_________________

1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:22 am 
Getting Side Ways
Offline

Age: 29

Posts: 638

Joined: 16th Feb 2005

Ride: EA Turbo

Location: Melbourne
VIC, Australia

Snort Performance wrote:
you seem to like 6 boost soo much go and purchase a manifold and i will be happy to come down for the side/side comparison both you and i can be present ;) to be sure no dodgy s**t goes on

in fact maybe lets get etm 6-boost and snort manifold , lineup mag like street fords for back/back tests would make for a great read


I've already PM'd ETM, i'll try get onto 6BOOST too. I will be purchasing a 6BOOST one in my next build, but for now my AIT one does me just fine.

 

_________________

1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:23 am 
Fordmods Addict
Offline
User avatar

Age: 31

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia

why bother with a comparison, numbers likes 8.71@164 talk pretty loud :lol:

 

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw

Top
 Profile  
 
 
 Post subject: Re: info about huge 4.0L turbo project gold coast QLD
Posted: Thu May 06, 2010 12:24 am 
Commercial Sponsor
Offline
User avatar

Posts: 123

Joined: 27th Sep 2007

Ride: eb-twin turbo

Location: albury/wodonga
VIC, Australia

good work mate , with what your trying to suggest we have everything to lose lol

enough is enough lets put them side by side as i said i have nothing to fear

 

_________________

Snort Snort, we make our own speed!!!!!

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 7  [ 100 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 7  Next

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Dec 14, 2017 7:56 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names