Fordmods Logo

Injectors 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: Injectors
Posted: Tue Sep 07, 2010 8:02 pm 
Smokin em up
Offline

Age: 36

Posts: 225

Joined: 29th Jul 2007

Ride: 97 EL XR6

Location: Melbourne
VIC, Australia

Hey guys
I have a few questions about upgrading my injectors.

Q1.
What are the differences between injectors in an EL XR6 and a BA XT or even an XR6T?

Q2
Are they interchangable?

Q3
What injectors are recommended if I wanted to go forced induction in the future chasing about 300-350rwkW?


Cheers in advance
Top
 Profile  
 
 
 Post subject: Re: Injectors
Posted: Tue Sep 07, 2010 8:21 pm 
Commercial Sponsor
Offline
User avatar

Posts: 123

Joined: 27th Sep 2007

Ride: eb-twin turbo

Location: albury/wodonga
VIC, Australia

el injectors are around 19-20lbs - ba injectors are around 29lbs ( n/a ) with the turbo model the run higher pressure regulator

they fit but without ecu mod will run way too rich , for 300-350rwkw i suggest 60lbs leaves plenty of fuel if you decide to push bigger numbers

 

_________________

Snort Snort, we make our own speed!!!!!

Top
 Profile  
 
 
 Post subject: Re: Injectors
Posted: Wed Sep 08, 2010 12:28 am 
Smokin em up
Offline

Age: 36

Posts: 225

Joined: 29th Jul 2007

Ride: 97 EL XR6

Location: Melbourne
VIC, Australia

Snort Performance wrote:
el injectors are around 19-20lbs - ba injectors are around 29lbs ( n/a ) with the turbo model the run higher pressure regulator

they fit but without ecu mod will run way too rich , for 300-350rwkw i suggest 60lbs leaves plenty of fuel if you decide to push bigger numbers





So I can install BA injectors into my EL without any problems? but what your saying is that even though the increase from 20 to 29lb, me car would run for too rich without an aftermarket ECU or a tune?

would I then be able to use AU injectors for the time being until I do the turbo?
Top
 Profile  
 
 
 Post subject: Re: Injectors
Posted: Wed Sep 08, 2010 2:28 am 
Commercial Sponsor
Offline
User avatar

Posts: 123

Joined: 27th Sep 2007

Ride: eb-twin turbo

Location: albury/wodonga
VIC, Australia

plper1 wrote:
Snort Performance wrote:
el injectors are around 19-20lbs - ba injectors are around 29lbs ( n/a ) with the turbo model the run higher pressure regulator

they fit but without ecu mod will run way too rich , for 300-350rwkw i suggest 60lbs leaves plenty of fuel if you decide to push bigger numbers





So I can install BA injectors into my EL without any problems? but what your saying is that even though the increase from 20 to 29lb, me car would run for too rich without an aftermarket ECU or a tune?

would I then be able to use AU injectors for the time being until I do the turbo?



yes they fit but require remapping the ecu , au injectors will work without ecu modification

 

_________________

Snort Snort, we make our own speed!!!!!

Top
 Profile  
 
 
 Post subject: Re: Injectors
Posted: Wed Sep 08, 2010 10:24 pm 
Smokin em up
Offline

Age: 36

Posts: 225

Joined: 29th Jul 2007

Ride: 97 EL XR6

Location: Melbourne
VIC, Australia

thank you very much
Top
 Profile  
 
 
 Post subject: Re: Injectors
Posted: Thu Sep 09, 2010 7:49 pm 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

I wouldn't go under 36Lb with forced induction though..
If its a V8 injectors and maf can be purchased...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
 Post subject: Re: Injectors
Posted: Fri Sep 10, 2010 2:26 pm 
Smokin em up
Offline

Age: 36

Posts: 225

Joined: 29th Jul 2007

Ride: 97 EL XR6

Location: Melbourne
VIC, Australia

yeah at this point i am not getting a turbo, but i will much later down the track

but thanks anyway
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Mar 28, 2024 9:45 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names