
|
| JOSE |
|
|||
|
well, $50 you could have spent towards decent bosch or similar pump
_________________ Because i can. |
|||
| Top | |
|||
| frankieh |
|
|||
|
Yes probably, but I was on a budget and the pump wont be working hard anyway as you say. If money was no object, I'd by a genuine Subaru turbo pump ... all metal all the way.... I was on a budget at the time so I bought what I could afford.. now I have more, but I'll try this one first and see how I go.. when it fails I will get a shurflo or something else as good.
_________________ EL Ghia, Genie strags, 3 inch cat, 2.5" exhaust, black interior etc etc. |
|||
| Top | |
|||
| frankieh |
|
|||
|
Engine starts... timing was out which was to be expected.. but sadly I have a water leak pissing out near the water pump... will be using a mirror tomorrow to see where it's coming from.
_________________ EL Ghia, Genie strags, 3 inch cat, 2.5" exhaust, black interior etc etc. |
|||
| Top | |
|||
| frankieh |
|
|||
|
Water was the heater pipe to the water pump on the exhaust side... replaced O ring and no leakie now.
_________________ EL Ghia, Genie strags, 3 inch cat, 2.5" exhaust, black interior etc etc. |
|||
| Top | |
|||
| JackoTJK |
|
||
|
frankieh wrote: I do have a question or two though. In the little plastic box where the clutch cable goes, there is the lever going through the thrust bearing and the cable... and the round thing that grabs the cable and sits in the lever bowl. is that all that is supposed to be in there? it seems like if the cable stretches a little, the end would fall out of the round thing which just hooks around the T piece on the end of the cable... There has to be something else in there. My book doesn't tell me what that is. Also, how did you route the cable? I've never seen one of these set up so I just tried a few ways and choose what seemed to have the shallowest curves on the cable.. would like to match standard though if possible..... anyone clue me in ? (might ask in drivetrain too.) Hi frankieh great build! Yeah there is actually meant to be a spring on the clutch pedal that keeps slight tension on the cable, ie stopping that hook doing nasties. Simply goes from the pedal to the pedal box. You can get them new from Ford for nothing. I'll try to get some pics for you. Also the cable runs down past the extractors and follows the Rack with a clip
_________________ JackoTJK |
||
| Top | |
||
| huggiebear |
|
|||
|
JackoTJK wrote: frankieh wrote: I do have a question or two though. In the little plastic box where the clutch cable goes, there is the lever going through the thrust bearing and the cable... and the round thing that grabs the cable and sits in the lever bowl. is that all that is supposed to be in there? it seems like if the cable stretches a little, the end would fall out of the round thing which just hooks around the T piece on the end of the cable... There has to be something else in there. My book doesn't tell me what that is. Also, how did you route the cable? I've never seen one of these set up so I just tried a few ways and choose what seemed to have the shallowest curves on the cable.. would like to match standard though if possible..... anyone clue me in ? (might ask in drivetrain too.) Hi frankieh great build! Yeah there is actually meant to be a spring on the clutch pedal that keeps slight tension on the cable, ie stopping that hook doing nasties. Simply goes from the pedal to the pedal box. You can get them new from Ford for nothing. I'll try to get some pics for you. Also the cable runs down past the extractors and follows the Rack with a clip id like to see ford give anything away free. it cost me $5.50 last time i bought one
_________________ Member #7418 |
|||
| Top | |
|||
| JackoTJK |
|
||
|
lol smart a***
_________________ JackoTJK |
||
| Top | |
||
| badcooky |
|
||
|
How's it going frank,got the bugs out?
_________________ BA XL ute. |
||
| Top | |
||
| MAD |
|
|||
|
Any updates to this Frankieh? |
|||
| Top | |
|||
| ea street sleeper |
|
||
|
dude i need updates im about to do the same thing lol to mine
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
| Top | |
||
| Troyman |
|
|||
|
yea frankieh, whats happening???
_________________ ED XR6 TURBO, 267rwkw@12psi (gone but not forgotten)..AU GHIA TURBO, 216rwkw@7psi.(retired).. |
|||
| Top | |
|||
| frankieh |
|
|||
|
Not that much to report sadly.
_________________ EL Ghia, Genie strags, 3 inch cat, 2.5" exhaust, black interior etc etc. |
|||
| Top | |
|||
| badcooky |
|
||
|
Hang in there bud.
_________________ BA XL ute. |
||
| Top | |
||
| ea street sleeper |
|
||
|
lol yea i know that feeling bud no wife or kids but gf and lots of nieces nephews god kids all that stuff so its still heaps hektic lol but yea i got hold of the supercharger now just need injectors fuel reg n pump opefully she will run like that without a tune until i can afford a tune lol
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
| Top | |
||
| ToranaGuy |
|
|||
|
Don't worry frankieh, we all go thru times in life when we can't get much done on our projects. Hang in there as mentioned, you will find more time & get it done.
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: malkyl and 5 guests |