Fordmods Logo

Home » Forums » Fordmods Tech » Forced Induction Workshop

Supercharging EB 5.0 

 

Page 1 of 2 [ 23 posts ] Go to page 1, 2  Next

Post New Topic Post Reply  Previous topic Next topic
 
ALS008
 Post subject: Supercharging EB 5.0
Posted: Thu Jun 12, 2008 12:55 pm 
Parts Gopher
Offline

Posts: 67

Joined: 26th Apr 2008

Location: Melbourne
VIC, Australia
Im looking at doing some power upgrades to my EB 5.0

Atmo it is 100% stock has only 189000kms.

I want to get the best bang for buck i can. So at first i was thinking Upgrade that heads (gt40p's), full exhaust, and upgrade intake (explorer). With a tune i think around 160-180rwkw is manageable.

Then i seen a vid on youtube of a green supercharged ED, and the whine this thing was making almost made me shoot a load. It was really angry sounding.

So what power could i expect if i was to leave the engine all stock and just bolt the charger and give it a tune. I fugure since the air will now be forced into the engine, the flow of the head wont matter as much???

Would the stock E7 and HO manifold cope with the supercharger?? Is the question i ask??
Top
 Profile  
 
 
ALS008
Posted: Thu Jun 12, 2008 1:43 pm 
Parts Gopher
Offline

Posts: 67

Joined: 26th Apr 2008

Location: Melbourne
VIC, Australia
Next question,

What can anyone tell me about the Raptor supercharged setup??
Top
 Profile  
 
 
ALS008
Posted: Thu Jun 12, 2008 1:53 pm 
Parts Gopher
Offline

Posts: 67

Joined: 26th Apr 2008

Location: Melbourne
VIC, Australia
This is the car, and its also an EB:

http://youtube.com/watch?v=DKExsCPwsr4&feature=user

http://youtube.com/watch?v=Kv_yu-9jMAM&feature=user
Top
 Profile  
 
 
Steady ED
 Post subject: Re: Supercharging EB 5.0
Posted: Thu Jun 12, 2008 2:06 pm 
Fordmods Addict
Offline
User avatar

Age: 38

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia
ALS008 wrote:
Would the stock E7 and HO manifold cope with the supercharger?? Is the question i ask??

Yup.

http://youtube.com/watch?v=2XN2lX_YQkw
http://youtube.com/watch?v=X6Ro-piLCfQ

That EL XR8 has stock series 1 motor, so HO manifold and E7 heads.
Vortech V1 S-Trim, wolf 3d v4, ebay cooler with s**t 2.5" piping.
Was running about 4psi at the manifold in those videos.
Now up around 7-8 making about 240rwkw.

 

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw
Top
 Profile  
 
 
schnoods
Posted: Thu Jun 12, 2008 5:09 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2057

Joined: 25th May 2006

Ride: ef xr8

Power: 229 rwkw

Location: Perth
WA, Australia
Between 220-240 rwkw is about the limits of the stock cam and E7 heads.

Im running E7's and stock cam and rockers and im just about on the limit of them, power starts tapering off at 4800, even though it has an extra PSI at 5500.

I have seen a AU with a blower cam and vortech running over 400rwhp, I'd be looking to swap over the heads and rocker gear.

I made 228 rwkw with my set up running around 8.5 psi, gotta get it back to the dyno soon to check AFR's as it wasnt getting WOT completely.

The raptors seem to be pretty reliable so far though there is nothing off the shelf for the 5.0L so if your good with tools, you should be able to save a bit of dough.

 

_________________

Because of Beer, Thirst is a Beautiful Thing!

'95 EF XR8 auto, Advance headers, 3" exhaust, Cobra manifold, BBK 75mm throttle body , 80MM Marauder MAF, Vortech V2 T Trim , 307 rwhp, 405 ft/lb 13.2 @ 105 MPH

Now N/A (permanent Lag) - AFR 165's, Comp XE270 cam, 1.6 RR - 269 rwhp 14.1 @ 102mph.
Top
 Profile  
 
 
schnoods
Posted: Thu Jun 12, 2008 5:16 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2057

Joined: 25th May 2006

Ride: ef xr8

Power: 229 rwkw

Location: Perth
WA, Australia
ALS008 wrote:
This is the car, and its also an EB:

http://youtube.com/watch?v=DKExsCPwsr4&feature=user

http://youtube.com/watch?v=Kv_yu-9jMAM&feature=user


Thats RAPTOR_XR8 's setup, he has a build thread and he seems pretty happy with it.

http://boost.fordmods.com/forums/viewto ... ptor%20xr8

 

_________________

Because of Beer, Thirst is a Beautiful Thing!

'95 EF XR8 auto, Advance headers, 3" exhaust, Cobra manifold, BBK 75mm throttle body , 80MM Marauder MAF, Vortech V2 T Trim , 307 rwhp, 405 ft/lb 13.2 @ 105 MPH

Now N/A (permanent Lag) - AFR 165's, Comp XE270 cam, 1.6 RR - 269 rwhp 14.1 @ 102mph.
Top
 Profile  
 
 
svo_matt
Posted: Thu Jun 12, 2008 7:50 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 582

Joined: 15th Jan 2008

Ride: supercharged eb

Location: Sydney
NSW, Australia
when my 5liter was a standard(fully standard) set up with the blower (vortec)runing with xr6 turbo injectors i was pulling 260rwkw

 

_________________

..My fake plant died because I forgot to pretend to water it..
Top
 Profile  
 
 
schnoods
Posted: Thu Jun 12, 2008 10:09 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2057

Joined: 25th May 2006

Ride: ef xr8

Power: 229 rwkw

Location: Perth
WA, Australia
260rwkw is a massive amount!

What sort of boost was that running?? Manual?

 

_________________

Because of Beer, Thirst is a Beautiful Thing!

'95 EF XR8 auto, Advance headers, 3" exhaust, Cobra manifold, BBK 75mm throttle body , 80MM Marauder MAF, Vortech V2 T Trim , 307 rwhp, 405 ft/lb 13.2 @ 105 MPH

Now N/A (permanent Lag) - AFR 165's, Comp XE270 cam, 1.6 RR - 269 rwhp 14.1 @ 102mph.
Top
 Profile  
 
 
ALS008
Posted: Fri Jun 13, 2008 12:09 am 
Parts Gopher
Offline

Posts: 67

Joined: 26th Apr 2008

Location: Melbourne
VIC, Australia
Can you buy a kit for the EB windsor, or can you only buy the compressor and do the rest yourself.
Top
 Profile  
 
 
schnoods
Posted: Fri Jun 13, 2008 12:28 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2057

Joined: 25th May 2006

Ride: ef xr8

Power: 229 rwkw

Location: Perth
WA, Australia
Not with the raptor yet. You'd have to buy the compressor and do up the rest.


http://www.capa.com.au/kits_ford_au_v8.htm

At nearly 8 grand for a kit for the vortech and over 6 grand for the Powerdyne, the raptor blower is only 2500. Add a few weekends and maybe a grands worth in materials for piping and a few parts, another grand for a decent tune and you should have a pretty tidy power gain for under 5 grand.

 

_________________

Because of Beer, Thirst is a Beautiful Thing!

'95 EF XR8 auto, Advance headers, 3" exhaust, Cobra manifold, BBK 75mm throttle body , 80MM Marauder MAF, Vortech V2 T Trim , 307 rwhp, 405 ft/lb 13.2 @ 105 MPH

Now N/A (permanent Lag) - AFR 165's, Comp XE270 cam, 1.6 RR - 269 rwhp 14.1 @ 102mph.
Top
 Profile  
 
 
ALS008
Posted: Fri Jun 13, 2008 12:54 am 
Parts Gopher
Offline

Posts: 67

Joined: 26th Apr 2008

Location: Melbourne
VIC, Australia
So is that what these pumps cost, $2500.

Its not a bad price.
Top
 Profile  
 
 
schnoods
Posted: Fri Jun 13, 2008 1:04 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2057

Joined: 25th May 2006

Ride: ef xr8

Power: 229 rwkw

Location: Perth
WA, Australia
http://www.raptorsc.com.au/products.php

The Raptor R looks good if you are building up a toughish motor.

http://www.capa.com.au/prices_vortech.htm

A V2 SQ is $2941 as well, has a lot more in it boost wise, Some of em are sealed too so no mucking around with oil lines.

 

_________________

Because of Beer, Thirst is a Beautiful Thing!

'95 EF XR8 auto, Advance headers, 3" exhaust, Cobra manifold, BBK 75mm throttle body , 80MM Marauder MAF, Vortech V2 T Trim , 307 rwhp, 405 ft/lb 13.2 @ 105 MPH

Now N/A (permanent Lag) - AFR 165's, Comp XE270 cam, 1.6 RR - 269 rwhp 14.1 @ 102mph.
Top
 Profile  
 
 
svo_matt
Posted: Sun Jun 15, 2008 1:36 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 582

Joined: 15th Jan 2008

Ride: supercharged eb

Location: Sydney
NSW, Australia
schnoods wrote:
260rwkw is a massive amount!

What sort of boost was that running?? Manual?


that was running with about 8psi boost and a standard T5 manual

 

_________________

..My fake plant died because I forgot to pretend to water it..
Top
 Profile  
 
 
Kilma
Posted: Sun Jun 15, 2008 5:28 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1239

Joined: 1st Jul 2005

Gallery: 9 images

Ride: EF XR8 & 2002 GSXR-1000

Location: Perth
WA, Australia
My EF XR8 just has a blower, extracors & exhaust. I made 297rwhp, and pulled a 13.5 quarter mile.

Here is a vid of it.
http://www.youtube.com/watch?v=IQobVruRgmU

 

_________________

The fast fun: Suzuki GSXR1000
The one I use when I can't use the fast fun: Blown EF XR8
Top
 Profile  
 
 
badcooky
Posted: Sun Jun 15, 2008 5:41 pm 
Getting Side Ways
Offline

Posts: 631

Joined: 27th Jan 2007

Ride: Supercharged BA XL ute

Location: Gordonvale
QLD, Australia
I think 260RWKW on that set up is a bit optimistic.

 

_________________

BA XL ute.
P'maker headers',Hi flow cat,3" sports sytem,
Raptor V-clutched lightweight not intercooled,no tranny cooler,no worries.
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 2  [ 23 posts ]  Go to page 1, 2  Next
Jump to:  

Home » Forums » Fordmods Tech » Forced Induction Workshop

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Apr 24, 2024 4:44 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names