|
| Tocchi |
|
|||
|
whats a good price for one?
ive been told $400 (is that ok?) any brands to watch out for/avoid using? im (going to be) running a Wolf 3D V4. i already have it but i havent installed the kit yet...or the wolf (bought it today) |
|||
| Top | |
|||
| Tocchi |
|
|||
|
never mind. i found out that i need:
Bosch LSM11 wideband sensor = $357.50 |
|||
| Top | |
|||
| stockstandard |
|
|||
|
Although it is called a wideband, that sensor is not a true wideband sensor.
A true wideband sensor needs the sensor and controller. The cheapest setup I have seen is the innovate LC-1 which is $199 US for the sensor and controller. Techedge also do setups ranging from $190 for a kit you need to build yourself (not easy) to $600 for kits including ready made controllers, sensors, looms and gauges. edit: that price you have on the LSM is also VERY expensive.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
I am running the LC1, you can get it from EMS in sydney, or any EMS installer
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Dansedgli |
|
||
|
Ive got a wide band sensor that was recommended for use with the EMS that I have no use for as I sold the EMS.
If ya want it its yours for $100. I paid $300 for it and havent used it. The part number is: 0 258 104 002 |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Is that an LC1, if so, i will take it, as i want to run 2 on the 8, but havent got around to getting another.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Dansedgli |
|
||
|
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
No worries
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Tocchi |
|
|||
|
stockstandard wrote: Although it is called a wideband, that sensor is not a true wideband sensor.
A true wideband sensor needs the sensor and controller. The cheapest setup I have seen is the innovate LC-1 which is $199 US for the sensor and controller. Techedge also do setups ranging from $190 for a kit you need to build yourself (not easy) to $600 for kits including ready made controllers, sensors, looms and gauges. edit: that price you have on the LSM is also VERY expensive. yeah, the computer program has the air:fuel ratio (running tune thru a laptop)... so along with the wideband sensor, would that eliminate the need for a hand controller? yeah it is very expensive, i later found: Price: $299.00 (aussie) http://wolfems.cart.net.au/details/721244.html and the wolf 3D V4 ecu software (not the computer program) only supports that Bosch LSM11 (according to the manual) |
|||
| Top | |
|||
| Dansedgli |
|
||
|
Buy mine its $100!! Brand new in box!!
Cheap cheap. |
||
| Top | |
||
| Tocchi |
|
|||
|
yeh ok...thanks. give us a week or so to for my pay to go into my bank account
|
|||
| Top | |
|||
| Dansedgli |
|
||
|
Cool, shoot me a PM when your ready.
|
||
| Top | |
||
| stockstandard |
|
|||
|
Tocchi wrote: stockstandard wrote: Although it is called a wideband, that sensor is not a true wideband sensor. A true wideband sensor needs the sensor and controller. The cheapest setup I have seen is the innovate LC-1 which is $199 US for the sensor and controller. Techedge also do setups ranging from $190 for a kit you need to build yourself (not easy) to $600 for kits including ready made controllers, sensors, looms and gauges. edit: that price you have on the LSM is also VERY expensive. yeah, the computer program has the air:fuel ratio (running tune thru a laptop)... so along with the wideband sensor, would that eliminate the need for a hand controller? yeah it is very expensive, i later found: Price: $299.00 (aussie) http://wolfems.cart.net.au/details/721244.html and the wolf 3D V4 ecu software (not the computer program) only supports that Bosch LSM11 (according to the manual) They are $259 from techedge (although they dont have anything nice to say about them). I think you might find that the LSM11 is the only O2 sensor that the wolf will drive, but it will probably accept the output of any stand alone windeband controller. I would be VERY suprised if it didn't.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| IMPRTETA |
|
||
|
i got a innovative LM-1 with RPM converter is awsome!
cost me $580 |
||
| Top | |
||
| Dansedgli |
|
||
|
Hey IMPRTETA where did you buy your LM1?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
