Fordmods Logo

XR6T piston dish? or chamber cc..has been found 

 

Page 2 of 2 [ 23 posts ] Go to page Previous  1, 2

 
Posted: Thu Mar 02, 2006 2:54 pm 
Parts Gopher
Offline

Age: 51

Posts: 94

Joined: 9th Jan 2006

Location: Sydney
NSW, Australia

Arias Forged PIstons are available from Rocket.

Here are the specs...

FORD B.A XR6 TURBO PISTONS
STD BORE FACTORY RANGE 92.25MM TO 92.31 BORE
AP 341813 20 THOU OVER 3.648"BORE 92.65MM BORE
PISTON DISH - 2 CC LESS THAN STD
2 X VALVE RELIEF 1.5/1.5/4.0 MM RINGS
PISTON HAVE FACTORY OFFSET ON PIN
SUPPLIED WITH RINGS.

PART NO: AP341813 = 20 THOU OVER
PART NO: AP341814 = 10 THOU OVER
Top
 Profile  
 
 
Posted: Thu Mar 02, 2006 7:16 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

playswithnitro wrote:
Arias Forged PIstons are available from Rocket.

Here are the specs...

FORD B.A XR6 TURBO PISTONS
STD BORE FACTORY RANGE 92.25MM TO 92.31 BORE
AP 341813 20 THOU OVER 3.648"BORE 92.65MM BORE
PISTON DISH - 2 CC LESS THAN STD
2 X VALVE RELIEF 1.5/1.5/4.0 MM RINGS
PISTON HAVE FACTORY OFFSET ON PIN
SUPPLIED WITH RINGS.

PART NO: AP341813 = 20 THOU OVER
PART NO: AP341814 = 10 THOU OVER


I deal alot with rocket at work, and to get the arias pistons done with flat top was going to cost over $2000, and the BA valve reliefs are in the wrong spot.
anyway i have it all sorted out and i'm CP pistons, the BA turbo piston made with no alve reliefs and with no dish and at a very good price. perfect

 

_________________

PERMANENTLY BANNED

Top
 Profile  
 
 
Posted: Fri Mar 03, 2006 9:38 am 
Parts Gopher
Offline

Age: 51

Posts: 94

Joined: 9th Jan 2006

Location: Sydney
NSW, Australia

Hey Tickford,

If someone's trying to slug you over $2000 for those pistons from Rocket... You're getting it in the rear! :oops:

Their retail price is $1300.

A custom set won't even get up to that sort of mark.


If the valve reliefs are wrong: So are the Genuine Ford Factory pistons! Arias put the valve reliefs in the exact same spot as the factory did. Same with the pin offset.



Talk to Mick or email him at sales@rocketind.com
Top
 Profile  
 
 
Posted: Fri Mar 03, 2006 6:23 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

BA heads have 4 valves per cyl, EF heads have 2.
there for the valve releifs are in the wrong spot if i use them in an ef engine.

arias direct want 1800 for custom one off pistons. trade price

 

_________________

PERMANENTLY BANNED

Top
 Profile  
 
 
Posted: Fri Mar 03, 2006 9:09 pm 
Smokin em up
Offline

Age: 46

Posts: 221

Joined: 7th Jan 2006

Gallery: 2 images

Ride: F150 EL mont&2001 cobra

Location: Innisfail
QLD, Australia

Hey tickford where do you work? I need a decent mechanic to sort my F truck.

 

_________________

Smoken the hides in top gear

Top
 Profile  
 
 
Posted: Fri Mar 03, 2006 9:58 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

351EL wrote:
Hey tickford where do you work? I need a decent mechanic to sort my F truck.



hmm what needs sorting?

 

_________________

PERMANENTLY BANNED

Top
 Profile  
 
 
Posted: Sat Mar 04, 2006 12:45 am 
Smokin em up
Offline

Age: 46

Posts: 221

Joined: 7th Jan 2006

Gallery: 2 images

Ride: F150 EL mont&2001 cobra

Location: Innisfail
QLD, Australia

Innisfail to home hill on 110 liters of fuel.

 

_________________

Smoken the hides in top gear

Top
 Profile  
 
 
Posted: Sun Mar 05, 2006 1:18 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

351EL wrote:
Innisfail to home hill on 110 liters of fuel.



PM me with all the details of the engine mods

 

_________________

PERMANENTLY BANNED

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 23 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 19, 2017 5:37 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names