|
| kato |
|
||
|
Hey guys, wanting to know where I can purchase one of these locally to suit explorer manifold??
_________________ EF XR8 5spd: 302ci /178rwkw |
||
| Top | |
||
| znipa-x |
|
|||
|
kato wrote: Hey guys, wanting to know where I can purchase one of these locally to suit explorer manifold??
I've got a 1" spacer, if that will do the job, $20 and postage.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| xf84 |
|
|||
|
If not, yiu can drive to High Performance world at Parramatta. I think it was like $60. Can't remember.
_________________ Old - XF with XH XR8 Driveline... http://www.fordmods.com/ford-v8-f2/my-xr8-power-xf-falcon-t20529.html |
|||
| Top | |
|||
| ELGT |
|
|||
|
Only a 1/2 inch spacer or less will work. Any larger on EF/L fouls bonnet
|
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Longer bolts are required also....
Stuff buying off Hollywood.. Another wanker !!!!
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| One Drone |
|
|||
|
I have a 1/2" spacer and the upper rubs on the heat shroud.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| znipa-x |
|
|||
|
EBXR8380 wrote: Longer bolts are required also....
Stuff buying off Hollywood.. Another wanker !!!! the bolded text better not be directed at me..... I fully intend to use a 1" once my shaker mod is done, may have to add a bonnet bulge to accommodate it, but it will be fitted, one day  , and they come with the bolts (although I would keep them  ), I bought it at the same time as the 3/8" I currently have fitted.
Just thought I would offer it up incase he was unable to source one at a reasonable priced locally and maybe machine it down or something, it cost me practically nothing coming across with the other stuff I got at the time so getting another down the track won't matter. guess I won't be so generous next time.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| Free347 |
|
|||
|
Yep, HPW - made by Trickflow to suit the explorer/cobra. A fair bit more than $60 though, more around the $100 to $120 was the last quote I got.
|
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
Free347 wrote: Yep, HPW - made by Trickflow to suit the explorer/cobra. A fair bit more than $60 though, more around the $100 to $120 was the last quote I got.
Yeah mate definately between $100-120, just chased one up and recently and their supplier didnt have or couldnt get hold of any trickflow 3/8" ones, could only get the FMS 1/2" ones, but i'm pretty sure i would have underside of bonnet clearance problems with the 1/2" so i'll just patiently wait for the 3/8". Also the FMS 1/2" ones come with longer bolts.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
